velleman K2649 Thermostat with LCD Display Instruction Manual
Use
The setting of the hysteresis does not depend on the set temperature. Do not set the minimum hysteresis
right from the beginning: in this case the regulation is most precise, however it could happen that the heating
gets switched on and off much too fast and too often (e.g. when the thermostat is located near the radiator).
This is not too healthy for the heating installation and/or relay, and too much energy is consumed. Therefore
start with RV4 in the middle position, and then search the ideal position for your application.
Suppressing inductive loads :
Should the operation of the thermostat get disturbed by the switching of inductive loads (even if the switched
power is not so high), then this is due to the sparks produced in the relay. In most cases this can be reme-
died by putting a VDR (e.g. VDR300) over the contacts. Moreover a series connection of a 100 ohm resistor
with a 47 or 100nF/400V capacitor can be placed in parallel with the VDR in order to further reduce the
sparks (see Fig. 8.0).
LOAD
100 ohm / 0,5W
VDR
MAINS
(VDR300)
100nF/400V
FIG. 8.0
19
| General | Details |
|---|---|
| Name | velleman K2649 Thermostat with LCD Display Instruction Manual |
| Make | Velleman |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.56 MB |
(1 votes, average: 5.00 out of 5)
Loading...
velleman VM148 Programmable Thermostat Instruction Manual
SIEMENS RS485 Flush Mounted Room Thermostat User Manual
Homematic IP BMOAONSUT Radiator Thermostat User Manual
MERSCHEL iQ MD2 Wired Thermostat User Manual
Google Cloud G953-02161-03-A Nest Learning Thermostat Instruction Manual
beok-controls TGR86 Wi-Fi Thermostat User Guide
FRICO TPT16, TPT16WF Thermostat Instruction Manual
HYSEN HY511 WiFi Heating Thermostat Owner’s Manual
Danfoss MBC 8000 Heavy Duty Thermostat Installation Guide
Honeywell FocusPRO TH6000 Series Programmable Thermostat Instruction Manual
SALUS RT310TX Wireless Programmable Thermostat User Guide