Home > Tuya > tuya Mi-750 WiFi Smart Thermostat Instruction Manual

tuya Mi-750 WiFi Smart Thermostat Instruction Manual

Thermostat installation for two or more heating mats  
Operation - basic functions  
Switching ON/OFF  
Tap the home button o and keep pressed for about 3 seconds to switch  
the thermostat on or off. When the device is switched off (stand-by), the  
display shows the information according to what has been selected in  
advanced settings F4, code 16. If no button is tapped for about 30 se-  
1
2
one of the input keys  
˅
conds, the screen will gooblank (the display will be black). With tapping  
˄
the display is reactivated.  
H = 30cm  
3
Note:  
Each time the device is switched on, all the icons (see overview of display  
structure) appear on the display for a short moment.  
Activate key lock  
1. Electrical thermostat; power supply cable  
Switch to the display main screen and tap the  
˄
button for about  
NYM 3 x 1.5 mm2.  
3 seconds to activate the key lock (child lock). To disable the key lock,  
2. Corrugated tube for the temperature sensor (floor sensor)  
or the cold lead (both are not to be installed inside the  
same tube).  
3. Flush-mounted junction box (if two or more heatings mats  
are to be connected to the same thermostat, a separate  
flush-mounted junction box is required).  
tap the  
˄
button for another 3 seconds. The thermostat can also be  
locked or unlocked in standby mode.  
Display sleep mode  
25 seconds by dimming. With tapping one of the input keys  
˅
If no button is tapped, the display will switch to sleep mode aſtoer about  
the  
˄
sleep mode ends.  
Display structure  
1
Note:  
9
If the thermostat is on, the last active screen is displayed in sleep mode.  
When the device is in standby mode, the display shows the information  
according to what has been selected in advanced settings F4, code 16.  
10  
11  
12  
13  
14  
MO TU WE TH FR ST SU  
2
P
3
Select operation mode  
°C  
°F  
RT  
FT  
Switch to the display main screen, tap the home button o and select  
4
ST  
one of the following operating modes:  
Program - Comfort - Eco - Holiday.  
Switch between the operating modes by repeatedly tapping the home  
button o.  
5
6
15  
16  
Comfort  
ECO  
7
8
TU  
Program  
P
Weekday Mon (MO) to  
Sun (SU)  
Comfort mode  
ECO mode  
MO-SU  
°C  
RT  
9
10  
11  
12  
13  
14  
15  
WiFi signal  
1
Holiday  
Program mode  
Temporary mode  
Time  
Key lock  
(child lock)  
P
°C  
°F  
Temperature unit  
Celsius/Fahrenheit  
2
3
Anti-freezing mode  
Heating ON  
Operating modes  
Temperature  
Comfort mode  
RT = Room temp.  
FT = Floor temp.  
RT  
FT  
Using comfort mode, the thermostat permanently (24/7) maintains the  
desired temperature. The temperature can be selected with the  
buttons. Do not confirm the selection with the o button, but wait a short  
moment until the temperature display changes from ST to RT or FT.  
Temperature setting is possible in the range of +5 °C bis +35 °C.  
The default setting (factory setting) is 23 °C.  
Holiday mode  
˄
and  
˅
4
ST  
ST = Set temperature  
Program mode event  
WAKING UP  
Program mode event  
LEAVING HOME  
Program mode event  
COMING HOME  
Program mode event  
GOING TO SLEEP  
Open window  
detection  
5
6
decrease value,  
selection “down”  
16  
ECO mode  
Using ECO mode, the thermostat permanently (24/7) maintains the  
desired temperature. The temperature can be selected with the  
buttons. Do not confirm the selection with the o button, but wait a short  
moment until the temperature display changes from ST to RT or FT.  
Temperature setting is possible in the range of +5 °C bis +35 °C.  
The default setting (factory setting) is 18 °C.  
“ON/OFF” button,  
Home button  
˄
and  
˅
7
increase value,  
selection “up”  
8
Note:  
When the device is switched on for the first time, the Wi-Fi signal  
starts  
flashing continuously until having connected successfully to your local  
Wi-Fi network (cf. settings F5 - Wi-Fi connection). If the device is connected  
to the Wi-Fi, the icon will continue to be displayed, but will stop flashing.  
If there is no access to the Wi-Fi network (e.g. reception disturbed, weak  
signal level), the icon will not be displayed.  
12  
GeneralDetails
Nametuya Mi-750 WiFi Smart Thermostat Instruction Manual
MakeTuya
LanguageEnglish
FiletypePDF (Download)
File size2.71 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
tuya M3 Series Thermostat User Guide
tuya M3 Series Thermostat User Guide
tuya MTS700N Wireless Thermostat User Manual
tuya MTS700N Wireless Thermostat User Manual
tuya BHT-005 Wifi Heating Thermostat User Manual
tuya BHT-005 Wifi Heating Thermostat User Manual
tuya TRV603 Smart WiFi Radiator Thermostat Instruction Manual
tuya TRV603 Smart WiFi Radiator Thermostat Instruction Manual

tuya Mi-750 WiFi Smart Thermostat Instruction Manual