Home > SEELEY > SEELEY Ducted Gas Heater with MagiQtouch Controller or Manual Thermostat Owner’s Manual
SEELEY Ducted Gas Heater with MagiQtouch Controller or Manual Thermostat Owner’s Manual
Adjusting the room fan speed
OPERATING YOUR HEATER
USING THE:
MagIQtouch Controller
For optimum performance and efficiency, it is
recommended that the room fan settings set
by your installer be used.
For operation details on the following
functions please refer to the MagIQtouch
Controller owners manual.
If required, in systems with a single
MagIQtouch Controller installed, the room fan
speed can be adjusted by the user by following
on-screen prompts. In systems with multiple
MagIQtouch Controllers, or a combination of
MagIQtouch Controller with air sensors
installed, the room fan speed is not user
adjustable.
Navigation
There are a few things you need to know in
order to navigate your new MagIQtouch
Controller that was supplied with your
heater.
Notes:
If you are unfimilliar with touch screen
technology, this section outlines some of the
sliders and buttons you will need to use.
1. Reducing the room fan speed may cause
the heater to cycle on and off (this is normal),
which may reduce the average heat output.
Manual Mode
2. If outlets are closed in conjunction with
reducing the room fan speed, at least 1 outlet
must remain open at all times – this may also
cause the heater to cycle as above.
When operating in MANUAL mode the
heater will turn on and off to maintain the set
temperature until turned off by the user.
Program Mode
MagIQtouch Controller Settings
Menu.
When operating in PROGRAM mode the
heater will automatically turn on and off for
the current time period to maintain the
programmed temperature.
Your MagIQtouch Controller includes a
settings menu which gives you access to
information about your Braemar gas ducted
heater and extra functions including:
The MagIQtouch Controller divides each
day into four time periods. You decide when
each of these periods begins and what you
want your system to be doing.
About Appliance
Access information about the appliances
installed in your system.
Additional Functions.
Min/Max Set Temperature
Adjusting the Maximum Gas Rate - TQM,
TQS4, TQS5, TQS6 and TQS7 series
heaters
You can change the minimum and maximum
temperature displayed on your slider,
depending on what temperature range you
prefer your system to work within.
The maximum gas rate can be adjusted if
required from the SETTINGS menu. The
option is found under the HEATER tab.
Night Quiet Mode
Reduce fan speed over the night period for a
quiet night’s sleep.
Select “GAS RATE” and choose from 25%,
50%, 75% and 100% to limit the maximum
gas rate .
Note: There are some settings that are only
available to trained service agents or installers.
Only qualified personnel should access these
options using a pin code.
Note: Reducing the maximum gas rate
setting will reduce heat output.
HOME OWNER’S MANUAL
2
| General | Details |
|---|---|
| Name | SEELEY Ducted Gas Heater with MagiQtouch Controller or Manual Thermostat Owner’s Manual |
| Make | SEELEY |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.49 MB |





























