Home > NOBO > NOBO NTL4S 07 NTL Heater with Thermostat Instruction Manual

NOBO NTL4S 07 NTL Heater with Thermostat Instruction Manual

Installation
WARNING - Minimum clearances and IP zone requirements must be adhered to.  
Do not locate the heater immediately below a fixed electrical power point.  
WARNING: This heater must not be connected to the electricity supply via an  
external switching device (such as a timer) or circuit that is regularly switched  
on and off by the utility supplier. Failure to follow this warning could result in  
the heater’s thermal cut-off being inadvertently reset and could create a fire  
hazard. Cables/flexes that are supplied pre-fitted to the product must NOT be  
extended.  
IMPORTANT - The wall bracket supplied with the heater must be used when  
wall mounting, and the heater must be installed in the correct orientation (not  
sideways). The fixings should be used to secure the bracket to the particular wall  
on which the heater will be installed. The heater should be positioned observing  
the minimum stated clearances around the heater.  
When wall mounting, this heater must be mounted on a vertical wall. It also  
must not be mounted on the ceiling.  
This product is not suitable for use/installation in drying rooms, cupboards, or  
similar.  
GeneralDetails
NameNOBO NTL4S 07 NTL Heater with Thermostat Instruction Manual
MakeNOBO
LanguageEnglish
FiletypePDF (Download)
File size0.2 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
NOBO NCU-2Te High Precision Thermostat Instruction Manual
NOBO NCU-2Te High Precision Thermostat Instruction Manual

NOBO NTL4S 07 NTL Heater with Thermostat Instruction Manual