Home > Milesight > Milesight WT201-868M Smart Thermostat User Guide

Milesight WT201-868M Smart Thermostat User Guide

5. PTAC  
ꢀꢁꢂꢃꢄꢅꢁꢆ ꢇꢈꢉꢊꢋꢌꢋ  
CL  
CN  
RC  
4. Remove the mounting plate of old thermostat. When removing, ensure the wires do  
not fall into the holes.  
RH  
W1  
W2  
5. Press the wiring backplate to decorative cover plate to fix them together. Ignore this  
step if you are not using a decorative cover plate.  
Note: It is suggested to use a decorative cover plate to cover the holes left on the wall  
by old thermostat, and to reduce the airflow from the hole that will affect temperature  
measurement.  
E
PTAC  
6. Pass the wires through the hole in the middle of the wiring backplate, then fix the  
wiring backplate (and decorative cover plate) to the wall using wall plugs and wall  
mounting screws.  
4. Installation  
1. Ensure the circuit of all related systems are shut off before installation.  
2. Remove old thermostat from the wall, check if the power supply is 24VAC with a 2A  
maximum current.  
Note: do not power the WT201 thermostat with maximum current for long time, which  
will damage the device.  
3. Disconnect the wires from old thermostat and label the wires with stickers. It is  
suggested to take a photo of the connected wires on the old thermostat for reference.  
11  
12
GeneralDetails
NameMilesight WT201-868M Smart Thermostat User Guide
MakeMilesight
LanguageEnglish
FiletypePDF (Download)
File size1.34 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Milesight WT201 Airteq Smart Thermostat User Guide
Milesight WT201 Airteq Smart Thermostat User Guide
Milesight WT101 Smart Radiator Thermostat User Guide
Milesight WT101 Smart Radiator Thermostat User Guide
Milesight WT201 Smart Thermostat User Guide
Milesight WT201 Smart Thermostat User Guide
Milesight WT30x Smart Fan Coil Thermostat User Guide
Milesight WT30x Smart Fan Coil Thermostat User Guide

Milesight WT201-868M Smart Thermostat User Guide