Home > MERSCHEL iQ > MERSCHEL iQ MD2 Wired Thermostat User Manual
MERSCHEL iQ MD2 Wired Thermostat User Manual
MD2 WIRED THERMOSTAT
To set the 7 days program
•
Press
for 3 seconds to start the 7 x 1 day program setting. The First period of the First day is
selected.
•
Press
or
to set the time of the first period of the day’s program.
to select the desired temperature setpoint.
•
•
•
Press
Press
Repeat
and
again
the above procedure for each period of each day.
to proceed to the next period.
The default settings you will receive with your MD2 are as follows:
All Days
Period 1
Period 2
Period 3
Period 4
0630 21℃
0800 18℃
18:00 21℃
22:30 16℃
To select Program Mode press
until
is displayed as the mode.
The schedule will then operate until another mode is selected.
Temperature can always be overridden manually by pressing the
and
buttons.
The
temperature will remain at this setting until the next programmed change occurs.
For example, using the above table, if it was 18:00 on a Monday, the thermostat would be set to 21°C. If you
wished to increase the temperature to 22°C, press to increase temperature to 22°C. The
thermostat would then retain this setting until 22:30 when the period 4 schedule would reduce the set
temperature to 16°C.
Keypad Lock
The Keypad Lock function can be selected On or Off in the parameter settings (see Parameter Settings below).
It is Off by default. Keypad lock is indicated by a Padlock at the top left of the display.
You can press
for 5 seconds to unlock the keypad for a temporary adjustment. The keypad will
lock again once the backlight on the display switches off.
| General | Details |
|---|---|
| Name | MERSCHEL iQ MD2 Wired Thermostat User Manual |
| Make | MERSCHEL iQ |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.3 MB |























