MAXXAIR 5100KI Deluxe with Rain Done Thermostat Instruction Manual
KEYPAD CONTROLS
FOR
MAXXFAN® Deluxe MODELS
5100KI • 6200KI
7000KI • 7500KI
5100KI40 • 6200KI40
7000KI40 • 7500KI40
NOTE: A beeping sound will confirm
each key press
ON/OFF:
Use this key to
start the fan or to turn off the fan. On Automatic Opening Models the lid will
also open or close when the fan is turned on or off. On Manual Opening
Models pushing this key while in Auto Mode will exit Auto Mode, turn off the
fan and the lid will stay in the position you selected. On Automatic Opening
Models this button will exit Auto mode, turn the fan off, and close the lid.
IN/OUT: Use this key to reverse the direction of the fan, the fan will slow
down and pause for two (2) seconds before resuming operation in the opposite
direction. Note: In Auto Mode the fan direction is automatically positioned to
Exhaust, but may be overridden and changed to Intake by depressing this key.
Note: Some models are Exhaust Only. On these models this key is deleted.
AUTO:
Auto Mode allows the thermostat to turn the fan ON and OFF
depending on the thermostat setting. Press this key once for less than three (3)
seconds to enter Auto Mode, three (3) quick beeps will confirm the MAXXFAN
has entered Auto Mode. To EXIT Auto Mode, press the ON/OFF key. Initial
factory set point for the thermostat is 26°C. The green LED will light to indicate
the MAXXFAN is in Auto Mode. To adjust, follow instructions below:
If no previous thermostat temperature was entered, or you wish to change a
previous set temperature, press the HOLD TO SET key for more than 3 seconds
and you will hear one long beep and the thermostat will be reset to 26°C. To
further adjust the set temperature, if desired, use the (+) or (-) Arrow keys to
adjust at 0.5°C increments per press. The fan will emit a beeping sound to
confirm this setting. If a previous thermostat temperature was entered, the fan
will remember this temperature setting and the next time you enter Auto Mode,
the fan will start ventilating automatically as directed by the thermostat. The
fan speed will automatically adjust based on the cabin temperature. As cabin
temperature rises, the fan increases in speed. Note: If 12 volt RV power is
removed from the MAXXFAN, the thermostat will be reset to 26°C.
ARROW
When in Auto Mode: Use the (+) & (-) Arrow keys to adjust the thermostat
set temperature up or down in 1° increments per press.
When in Manual Mode: Use the (+) & (-) Arrow keys to adjust the fan speed
up or down. When the fan speed reaches either the maximum or minimum
speed, the fan will respond with 2 quick beeps to indicate this.
ARROW KEYS PRESSED TOGETHER: Automatic Lift Models Only
Press the (+) & (-) Arrow keys at the same time to Open or Close the lid. The
fan motor will remain in its current state.
6
| General | Details |
|---|---|
| Name | MAXXAIR 5100KI Deluxe with Rain Done Thermostat Instruction Manual |
| Make | MAXXAIR |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.11 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Danfoss ECtemp 610 Electronic Thermostat Installation Guide
FRICO TAP16R Electronic Thermostat User Guide
Stelrad Radiator Thermostat RAS-D2 Combi Pack, Radiator Pack Instructions
QUIETWarmth Type UCG Thermostat User Manual
Honeywell PRO3000 Series Non-Programmable Digital Thermostat Instruction Manual
YOLINK YS4003-UC Smart Thermostat User Guide
AprilAire S86W MUPR WiFi Thermostat User Guide
STELPRO STE402NP Smart Electronic Thermostat User Guide
LENNOX S40 Smart Thermostat User Guide
HYSEN HY510 WiFi Heating Thermostat Instruction Manual