Hycontrol HY08AC Central Air Conditioning Thermostat Instruction Manual
Time section
Monday to
Sunday
Icon
Time (default)
06:00
Temperature(default)
20°C
to be lower than (X-2) °C, the fan is
1
turned off.
2
3
4
08:00
17:30
22:00
15°C
22°C
15°C
Set temperature for
external sensor
20-60°C
38°C
A9
AA
AB
0: off
1
Advanced Option
Standby bright
Reset
1: weak bright
2: brighter
Turn off thermostat ,long press
press
5S to enter advanced setting options, Short
Display Ao, press
whole show
key until
Ao
to set next item, press“ ”or“ ”to set item data
Symbol
Item
Parameter
Default
-1℃
Temperature
Calibration
-9-+9℃
A1
A2
0：half lock；（It is available to turn
on/off and adjust temperature）
1：full lock
Children Lock
0
Setting the lowest
limit temperature
Setting the highest
limit temperature
Fan energy saving
control
5-15℃
5℃
35℃
0
A3
A4
A5
16-50℃
Cautions on Installation:
1.To prevent the thermostat display from a high fluctuation, special treatment has been made to the
program. Therefore, it is normal that the thermostat cannot immediately display the sudden change of
temperature.
0: valve off,fan off
1: valve off,fan always on
0=5+2
2. The thermostat installed on 1.5m above the ground.
3.For the thermostat installed,please take care not to install it to the wall corner, door / window side or
behind the door or in such unheated area as exterior wall. Avoid hot / cold air duct, radiator, flue or
thermal pipe
4 When install the power supply, make sure that the power cable is well insulated.
5.Don’t open the internal circuit board..
6.HYAC series thermostat design for the standard 75x75x 35mm wall mount box installed. Follow the
instructions to open the rear cover base, mount it on the wall and wire it.
7.Before installing the thermostat, make sure that the system is disconnected. The maximum voltage of
the system shall meet the requirements specified in the Instruction Manual (Max. AC Voltage: 250V).
0
1=6+1
A6
A7
Programmable
2=7 (everyday all the same)
2:2pipe
4
Choose valve output
4:4 pipe
N1:inner sensor
N2:external sensor
N1
N3:Double sensor
when choose
N3，In the heating state, normally
only valve is opened , and the fan is
turned on when the external
A8
Choose sensor
temperature is detected to be ≥X°C.
When the temperature is detected
| General | Details |
|---|---|
| Name | Hycontrol HY08AC Central Air Conditioning Thermostat Instruction Manual |
| Make | Hycontrol |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.23 MB |
(1 votes, average: 5.00 out of 5)
Loading...
VILPE WIVE 100 Intake Vent Plus Thermostat
Haswill Electronics RC-113M PID Thermostat User Guide
WATTS Tekmar Wi-Fi Thermostat Instruction Manual
GENERAL LIFE 270 Wireless Room Thermostat User Manual
tuya Mi-750 WiFi Smart Thermostat Instruction Manual
Micro-Air 351 Air Conditioner Digital Thermostat User Guide
REHAU NEA SMART 2.0 Room Thermostat Installation Guide
LuxPro PSPLV512d Programmable Heating Thermostat Instruction Manual
DEVI 530M Electronic Thermostat Installation Guide
HIVE Cheap Smart Thermostat User Guide