Honeywell CMR707A1049 Programmable Room Thermostat User Guide
‘Efficient Daily Use’
PROGRAMMING THE CMR707
You now have a choice of how to set the
program for the next day:
Reviewing the Heating Program
To review or edit the heating program use
the PROGRAM
f. i) Press the COPY DAY button to copy
Monday’s program into Tuesday. The display
will go blank apart from the ‘non flashing’
day indicator, which indicates the day
copied and the ‘flashing’ target day to copy
the program to. To accept this day press the
or
buttons to navigate
between the 4 individual programming periods
for that day. Use the DAY button to step through
each day of the week, so the complete 7 day
heating program can be reviewed or edited.
green
button. To select a different target
Modifying the Heating Program
To change the heating program:
a. Press either of the PROGRAM
buttons to enter the programming mode.
The time / temperature settings for period
day press the DAY button until the ‘flashing’
day indicator is under the required day, then
or
accept it by pressing the green
button.
Note: Once the target day is confirmed it
becomes the day that is copied if the COPY
DAY button is pressed again.
ꢀ
on Monday (Day 1) will be flashing as
shown. The active period is highlighted by
a flashing square around the numbers at the
bottom of the screen and the selected day
is shown with the day indicator.
OR
ii) Press the DAY button to move the day
indicator to Tuesday (Day 2). The program
for that day can then be adjusted by following
steps b to e. Programs for the remaining days
can be set in the same way, using the DAY
button to move to the next day.
1
2
3
4
5
6
7
To exit the programming mode select the
desired operating mode by pressing the
AUTO, MAN or OFF buttons. Note: To run the
adjusted program select the AUTO mode.
ꢀ
ꢁ
ꢂ
4
b. To adjust the period start time use the
or buttons, the ‘OK?’ indicator will be
displayed to confirm the change. Holding the
button down will change the time quickly.
Disabling / Enabling Time Periods
The thermostat has 4 periods each day that
can be programmed, but you may not need
all of these switch points for your heating
requirements. Therefore, any period from
to 4 can be removed from (or returned to) the
heating program profile.
Note: If you are pressing the
or
buttons and the display flashes the next
period, it means the next period will be
pushed forward.
2
c. Once the required time is reached press
the green
button to confirm.
To disable or enable time periods:
a. To disable unwanted periods go to the
Note: If the original time setting did not
require adjustment press the green
button to move to step ‘d’.
desired period ( ꢁ to 4 )
using the
PROGRAM or buttons to navigate,
ensure the correct period is highlighted
with the flashing square symbol. Press and
d. The temperature setting for period
Monday (Day 1) will now be flashing. To
adjust this press the or buttons and
confirm the setting again by pressing the
green button.
ꢀ
on
hold the
button for at least 2 seconds
and the display will indicate the period has
been removed from the program.
b. To enable periods again follow the same
procedure as above, navigating to the
already disabled period. To enable this
e. The next time and temperature period will
now be active. Adjust this by repeating
steps b - d above until all 4 periods are set
for Monday or press the AUTO button to
run the program as set, at any time.
period again press and hold the
for at least 2 seconds.
button
4
firealarmresources.com
| General | Details |
|---|---|
| Name | Honeywell CMR707A1049 Programmable Room Thermostat User Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.16 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual
beok-controls TGR86 Wi-Fi Thermostat User Guide
SALUS RT310i Internet Thermostat Installation Guide
ECSPST Fort Programmable Thermostat User Guide
vtech W960 Installing E-Smart Thermostat Instruction Manual
HBX THM-0100 Programmable Thermostat Instruction Manual
Hive B011B3J6B8 Active Heating Thermostat Owner’s Manual
SOGEDIS 1001 MODEL UP Refrigerator Thermostat Instruction Manual
ENSTO ECO10BTW-J Floor Heating Thermostat Instruction Manual
PRO1 T771 Programmable Electronic Thermostat Instructions
INTIEL Controllers DT 3.1 Programmable Differential Thermostat User Guide