Honeywell 5000 Series Non Programmable Digital Thermostat Instruction Manual
Wiring conventional systems
Shaded areas below apply only to TH5320U/TH5220D or as otherwise noted.
1H/1C System
(1 transformer)
Heat-only System
with Fan
G W
C
Y
R Rc
G W C
R
Rc
Rc
R
Y
C
W
G
Power [1]
Rc
R
C
W
G
Power [1]
[R+Rc joined by jumper]
Compressor contactor
24VAC common [3]
Heat relay
[R+Rc joined by jumper]
24VAC common [3]
Heat relay
Fan relay
Fan relay
Cool-only System
Rc
R
Y
C
Heat-only
System
Rc
R
C
W
G
C Y R Rc
Power [1]
[R+Rc joined by jumper]
Compressor contactor
24VAC common [3]
Fan relay
W C
R Rc
Power [1]
[R+Rc joined by jumper]
24VAC common [3]
Heat relay
G
2H/2C System
(1 transformer) [6]
Rc
R
Heat-only
System
(Series 20) [5]
Y2 W2 G W C
Y R Rc
W C
Y R Rc
Power [1]
[R+Rc joined by jumper]
Y
C
W
G
Compressor contactor (stage 1)
24VAC common [3]
Heat relay (stage 1)
Fan relay
Rc
R
Y
[R+Rc joined by jumper]
Series 20 valve terminal “R” [1]
Series 20 valve terminal “W”
24VAC common [3]
C
W2 Heat relay (stage 2)
Y2 Compressor contactor (stage 2)
W
Series 20 valve terminal “B”
Heat-only
System
(normally open zone valve) [5]
C
Y
R Rc
2H/2C System
Y2 W2G W C
Y
R Rc
(2 transformers) [6]
Rc
R
Y
C
W
G
Power (cooling transformer) [1, 2]
Rc
R
Y
[R+Rc joined by jumper]
Power [1]
Normally open zone valve
24VAC common [3]
Power (heating transformer) [1, 2]
Compressor contactor (stage 1)
24VAC common [3, 4]
Heat relay (stage 1)
C
1H/1C System
(2 transformers)
Rc
R
Y
C
W
G
Fan relay
G W C
Y
R Rc
W2 Heat relay (stage 2)
Y2 Compressor contactor (stage 2)
Power (cooling transformer) [1, 2]
Power (heating transformer) [1, 2]
Compressor contactor
24VAC common [3, 4]
Heat relay
Fan relay
[6] In Installer Setup, set system type to
2Heat/2Cool Conventional.
NOTES
Wire specifications:
Use 18- to 22-gauge thermostat wire.
Shielded cable is not required.
[7] In Installer Setup, set changeover valve to
O or B.
[8] In Installer Setup, set system type to
2Heat/1Cool Heat Pump.
[1] Power supply. Provide disconnect means
and overload protection as required.
[9] In Installer Setup, set system type to
2Heat/2Cool Heat Pump.
[2] Remove jumper for 2-transformer systems.
[3] Optional 24VAC common connection.
[10] In Installer Setup, set system type to
3Heat/2Cool Heat Pump.
[4] Common connection must come from cool-
ing transformer.
[11] L terminal sends a continuous output when
thermostat is set to Em. Heat. Connect
to Honeywell zoning panels to switch the
panel to Emergency Heat.
[5] In Installer Setup, set system type to
Heat Only.
3
| General | Details |
|---|---|
| Name | Honeywell 5000 Series Non Programmable Digital Thermostat Instruction Manual |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell Home DT4 Channel Wired Room Thermostat Instruction Manual
SAVANT CLI-W220X-00 Multistat Smart Thermostat User Guide
DELTA DORE Tybox 2300 Wireless Thermostat User Guide
Danfoss RA 2000 Radiator Thermostat Installation Guide
WHITE-RODGERS 1F90-71 5-Day 2-Day Electronic Digital Thermostat Instruction Manual
Honeywell Home CT50 Series Thermostat Owner’s Manual
GENERAL LIFE 230S RF Digital Room Thermostat User Manual
Smartica HY607B 3A Zig Bee Thermostat User Manual
ADEPT T6100 Thermostat Instruction Manual
SALUS CONTROLS RT520 Thermostat User Manual