GENERAL ARUNA 300S RF Digital Room Thermostat User Manual

1

2

ProductDisplayLayout  

BATTERY PLACEMENT  

PAIRINGTHEROOMTHERMOSTATANDTHERECEIVER  

ENGLISH  



Primarily press the sync button of the Receiver for 2 seconds and see blinking  

greenlight oftheReceiver.  

7

8

1

2







While yourdeviceis turned off, pressand hold the"On/Off" button for 3 seconds.  

DIGITAL ROOM THERMOSTAT  

Pressthebutton until the“  

” menu appears.  

Press the “Up” or “Down” button of your Room Thermostat while the LED is  

flashing green.  

generallife.com.tr  

9

3

10  

11  





Ifthepairing issuccessful, thegreenflashing LEDon theReceiverwillbe steady.  

Receiverand Room Thermostathavebeen pairedto each other.  

4

5

6

ARUNA 300S RF USER MANUAL  

ROOMTHERMOSTATTEMPERATURECALIBRATION  

Temperature sensors which are used in Room Thermostats are highly sensitive.  

You may need to calibrate your Room Thermostat if you would like to get the same  

temperaturevalueswithother thermometersin yourliving space.  

GENERALSPECIFICATIONS  

1

2

3

4

5

6

7

8

9

Hour Indicator  

Press the screwdriver forward from the space at the bottom of the Room  

Thermostat, bend the tabs and separate the front cover. Insert 2 new AAA alkaline  

batteries in the battery housing with the correct battery direction. Replace both  

batteries at the same time. Align the front part of your Room Thermostat with  

corresponding slot on the back, and then push gently until the thermostat snaps  

into place.  

ARUNA 300S RF is a wireless room thermostat. The user can get more comfortable  

and economic heating/cooling by adjusting the room thermostat with the required  

temperature.  





While yourdeviceis turned off, pressand hold the“On/Off“ button for 3 seconds.  

Press the "On/Off" button until the “ ” menu appears. In order to see the  

Room Temperature  

Economy Mode  

Comfort Mode  

desired temperature, set the temperature difference by pressing the  

 Dailyand WeeklyProgramming  

“Temperature Adjustment Buttons”. This value can be arranged between “-8° C"  

Holiday Mode  

Weekly Program Mode  

Day Indicator  

 DifferentMode Options (Comfort, Economy, Holiday)  

and “+8° C".  

 Heating Calibration  

ON/OFFControl  

WirelessConnection  

Alkaline Battery  



In order to save the settings and exit, press the "On/Off" button until the device  

turns off.  

Low Battery Warning: When the “  

” icon appears on the screen, it means “low  

 Heating/Cooling Option  

TPIAlgorithm  

Battery Indicator  

Set Temperature  

Heating Indicator  

battery warning”. It is recommended to replace the batteries when this warning  

appears.  

 PreciseTemperatureMeasurement  

Note:Recommended temperaturecalibration is “0.0°C”.  

Warning: When the product is not used for a long period (more than 15 days),  

remove the batteries. Otherwise, malfunctions that may occur would be out of  

warranty. Pleasethrowyourdead batteriesinto thewastebin for batteries.  

ARUNA 300SRFand EQUIPMENTS  

FACTORY SETTINGS RESET  

10  

- If the Heating Indicator is blinking, the heating unit is working.  

- If the Heating Indicator is steady, the heating unit is not working.  

Cooling Indicator  

You can reset your Room Thermostat to its default factory settings. This operation  

resets the mode temperature values, calibration setting and heating/cooling  

modes to factory setting. In orderto resetyourRoom Thermostatto factory setting:  

ARUNA 300S RF  

Room Thermostat  

Holder  

11  

- If the Cooling Indicator is blinking, the cooling unit is working.  

- If the Cooling Indicator is steady, the cooling unit is not working.  

RECEIVERPLACEMENT  







While yourdeviceis turned off, pressand hold the“On/Off” button for 3 seconds.  

Pressthe“On/Off” button untilthe“ ” menu appears.  

While in the “ ” menu, select the “ ” option by using the “Up” or “Down”  

buttons and pressthe“On/Off” button.  

Your devicewillbe turned off and resetto factory settings.  

The important things to note for the Receiver placement are  

avoiding physical contact between the Receiver and  

heating/cooling unit, and protecting it against materials  

such asliquid, dust etc.  

RECEIVER  

1-Manual Operation Button: Deactivates the  

Receiver and allows you to use heating/cooling  

unit manually.  



Dowels and Screws  

Receiver  

1

2

3

DAY ANDHOURSETTINGS  

2-Pairing Button: Allows pairing the Receiver  

with the Room Thermostat.  

3-Receiver LED Light  

4-Receiver Power Cable Input  

5-Heating/Cooling Unit Connection Cable Input  

The devices should be placed in order to minimize the damage to the received and  

transmittedsignals bypayingattentiontothefollowingpoints;  







While your Room Thermostat is on, keep pressing the “Weekly Program” button  

for 3 seconds.  





The devicesshould not be mounted on metalsurfaces.  

At the first screen that appears, hour part will be blinking. You may set the time  

withthe“Up” and“Down” buttons.  

The devices should not be installed close to electrical cables and electronic  

equipment such ascomputers and televisionunits.  

After setting the time, the “Heating & Cooling Option” button needs to be pressed  

once. For minute setting, minute part will be blinking. You mayset the minute with  

the“Up”and “Down” buttons.  







The devices should not be installed near large metal structures or other building  

materialsusing finemetalmeshes such asspecialglass or specialconcrete.  

Distance between the Room Thermostat and the Receiver should not exceed 20  

metersor 2 floors.  

TECHNICALDATA  

Room Thermostat  



After setting the minute, the “Heating & Cooling Option” button needs to be  

pressedonce to setthedayof theweek.  

Dimensions  

Operating Current  

85mm / 125mm / 20mm  

3V DC (2 x AAA alkaline battery)  

0.1^oC  

Receivermust be installed atleast50cmawayfromtheheating/cooling unit.  





Mondayhas setasthefirstdayof theweekand indicated withnumber“1".  

Numbers indicate the following days respectively 2-Tuesday, 3-Wednesday, 4-  

Thursday, 5-Friday, 6-Saturdayand 7-Sunday  

4

5

RECEIVERLEDDESCRIPTIONS  

Temperature Measurement Accuracy  

Operating Temperature Range  

Battery Life  

(5^oC) – (30^oC)  

RECEIVERSETUP  

Steady Red  

Receiver has power but Receiver and Room Thermostat  







First, shut down your heating/cooling unit and your heating/cooling unit's power  

sourcewithallelectricalcurrent(fuse, socketetc.)  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  



When setting is done, you may exit by pressing the “Weekly Program” button for 3  

seconds.  

are not paired.  

Operating Temperature  

Storage Temperature  

Blinking Green  

Steady Green  

Waiting for pairing signal from the Room Thermostat.  

Receiver and Room Thermostat are paired.  

Heating/cooling unit is not operating.  

As shown in the connection diagram, connect one end of the heating/cooling unit  

connection cableto theCOMand theother to theNO input of theReceiver.  

Connect the other ends of the cable -which you connected to the Receiver- to  

room thermostat connection terminal as shown in your heating/cooling unit's  

user manual.  

MODESETTING  

MODES  

3 Short Orange Blinking Operate the heating/cooling unit signal has reached to  

the Receiver.  

Receiver  

Dimensions  

Operating Current  

Relay NO Switching Current  

90mm / 90mm / 25mm  

230V AC  

Steady Orange  

Heating/cooling unit is operating.  







You must first connect the Receiver power cable to the Receiver and then to the  

fuse which theheating/cooling unit is connected.  

PRESET MODES  

WEEKLY  

PROGRAM  

MODE  

MANUAL MODE  

3 Short Green Blinking  

Shut the heating/cooling unit down signal has reached  

to the Receiver.  

7A (240VAC – Resistive Load)  

10A (120VAC – Resistive Load)  

(-20^oC) – (+60^oC)  

After completing the cable connection process, firstly turn on your fuse and then  

yourheating/cooling unit.  

Blinking Orange  

Blinking Red  

Heating/Cooling unit operates in manual mode.  

Receiver did not get any signal from the Room  

Thermostat for 22 minutes or longer.  

Heating/cooling unit has shut down.  

Storage Temperature  

Comfort  

Mode  

Economy  

Mode  

Holiday  

Mode  

By pressing the Receiver's manual usage button for 2 seconds, you should see  

the Orange Light blinking on the Receiver. In this way, after making sure that the  

heating/cooling unit is operating, press the same button again for 2 seconds and  

seethattheOrange LEDturns off.  

ROOMTHERMOSTAT  

ButtonFunctions  

Your Room Thermostat has 5 different modes. 3 of them (Comfort, Economy and  

Holiday Mode) are preset modes. Other modes are manual mode and weekly  

programmode.  

ROOMTHERMOSTATPLACEMENT  

Room Thermostat needs to be placed in the room which is used most frequently.  

For instance; living room or lounge. Placing the Room Thermostat in a spot that  

have air circulation like entrance of a room or side of window should be avoided.  

Also anywhere close to heating/cooling units such as radiator, stove and spots  

which get direct sun lights would not be suitable. Room Thermostat needs to be  

located above the floor 150 cm height. Few trials may be made to find the most  

convenientspot.  



Setup theRoom Thermostatto pair theReceiverwiththeRoom Thermostat.  

In preset modes, temperature values are based on user's choices which have been  

set in the beginning. Manual mode allows the Room Thermostat to operate within  

the temperature which is required and set directly by user. Weekly Program mode  

continues to workaccordingto theweeklyschedule determined bytheuser.  

In orderto change thetemperaturevaluesof presetmodes:  

RECEIVERWIRINGDIAGRAM  

AC  

COM  

NO  

(230V)  







Press and hold the “Mode” button for 3 seconds while your Room Thermostat is  

on.  

Comfort Mode temperature value will appear. You may adjust the temperature  

valueof Comfort Mode bypressingthe“Up” and “Down”buttons.  

When setting is done, you may adjust the temperature value of Economy Mode  

withthe“Up” and “Down”buttons bypressingthe“Mode”button again.  

You mayexitthesettingscreenbypressingthe“Mode”button 3 seconds.  

In orderto change the manual mode temperature, pressthe “Up” or “Down”button  

while in the main screen. The Room Thermostat will switch to Manual Mode once  

pressedthe“Up” or “Down”button.  

1

4

2

3

5

6

min. 20 cm  





1

2

3

4

5

6

On/Off Button  

Heating & Cooling Option  

Weekly Program Button  

HEATING/COOLING UNIT  

Temperature Adjustment Button (To Decrease)  

Temperature Adjustment Button (To Increase)  

Mode Button  

Warning!  



You maypressthe“Mode”button to switchto theother modes.  

Operations within the heating / cooling unit or the electrical installation must be  

carriedout byprofessionally qualified persons.  

1

2

3

4

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL ARUNA 300S RF Digital Room Thermostat User Manual
Make	GENERAL
Language	English
Filetype	PDF (Download)
File size	2.18 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL

GENERAL ARUNA 300S RF Digital Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Product display layout Battery placement Pairing the room thermostat and the receiver Press the sync button of the receiver for 2 seconds to see the blinking green light. If the pairing is successful, the green flashing LED on the receiver will be steady. Temperature sensors used in room thermostats are highly sensitive. You may need to calibrate your room thermostat to match other thermometers in your living space. ARUNA 300S RF is a wireless room thermostat that allows for comfortable and economic heating/cooling. The devices should not be installed close to electrical cables and electronic equipment. Room thermostat needs to be placed in the room that is used most frequently, avoiding areas with direct sunlight or near heating/cooling units.
• Page 2: You may set the operating schedule of your room thermostat with a weekly program. The warranty period starts from the invoice date and is warranted against manufacturing defects for 5 years. Your room thermostat takes the average room temperature of the last 40 seconds as a basis. With the TPI algorithm, it learns how long it takes to reach the desired room temperature and how this temperature is maintained. Seven different temperature values can be set for each day in weekly programming. To set the weekly schedule, press and hold the “Weekly Program” button for 3 seconds while your room thermostat is on. In case of malfunctioning of the devices and apparatus whose warranty period continues, it is tested in our company. Malfunctions resulting from the use of devices contrary to the matters stated in the user manual are not covered by the warranty. The customer can make complaints and appeals to consumer courts or consumer arbitration committees. The warranty document must be kept by the customer during the warranty period.