FURRION FACW12ZA-BL Multi Zone Wall Thermostat Instruction Manual
Operation
HEAT MODE
FAN MODE
NOTE: The HEAT mode is only
available when furnace is enabled.
● The system will cycle the furnace
on and off based on the room
temperature and temperature set-
point.
● The temperature set-point is not
available.
● There are 3 fan speed selections in
this mode.
The fan operates continuously at
Low low speed and the
displays on the LCD.
icon
● There are 4 fan speed selections in
this mode.
The fan operates continuously at
Med medium speed and the
icon displays on the LCD.
● The fan speed selections only apply
to the rooftop fan that is part of
the Air Conditioner. The fan speed
selection does not change the fan
speed of the furnace.
The fan operates continuously
High at high speed and the
icon displays on the LCD.
The fan operates continuously at
Low low speed and the
displays on the LCD.
icon
DRY MODE
The fan operates continuously at
Med medium speed and the
icon displays on the LCD.
● Compressor runs continuously
when room temperature is higher
than set-point.
● Compressor cycles ON for 10
minutes and OFF for 6 minutes
when room temperature is lower
than set-point.
● The fan speed runs continuously at
low speed.
The fan operates continuously
High at high speed and the
icon displays on the LCD.
The fan speed varies depending
on the difference between the
Auto temperature set-point and room
temperature. The
icon
displays on the LCD.
Clock Setting
The fan is off. The
displays on the LCD.
icon
OFF
9
| General | Details |
|---|---|
| Name | FURRION FACW12ZA-BL Multi Zone Wall Thermostat Instruction Manual |
| Make | FURRION |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.48 MB |

FURRION FACW10ESSA-BL Standard Single Zone Wall Thermostat User Guide

































