fontastic RAVL Wireless Radiator Thermostat User Manual
GB
GB
Note: In programme mode 5 and 6, first enter time segments 1-6
for the first part of the week and then time segments 1-6 for the rest
of the week.
Key lock
To protect the thermostat from unintentional settings, the thermostat is
equipped with a key lock.
To activate/deactivate, briefly touch the button
tat to activate the display, press the button
once on the thermos-
once and then immedia-
Note: If no entry is made after 10 seconds, the values are automa-
tically saved.
tely press and hold the button
for approx. 6 seconds. The key lock is
active when the
symbol appears in the display.
Switching programme automatic/manual
On the thermostat, briefly touch the button once to activate the
display and press the button again to switch the mode. The automatic
programme is active when the symbol appears in the display. The
number next to it stands for the currently valid time segment (1-6).
Boost mode
The thermostat has a boost function that you can use to heat a room as
quickly as possible. The valve is completely opened for a certain time.
By default, this is 5 minutes.
To activate it, briefly touch the button
activate the display, press the button once and then immediately
press and hold the button for approx. 6 seconds. The boost mode
is active when the symbol appears in the display. To deactivate the
once on the thermostat to
Absence mode
The thermostat has an absence mode that you can activate to set a
specific temperature for several days, which is reset after the days have
elapsed. Use this function to save energy when you are not at home.
function, press any key.
1. On the thermostat, briefly touch the button
once to activate the
display and press and hold the button again for approx. 6 seconds to
enter the settings menu.
Window open detection
If a window is opened near the thermostat and the temperature drops
to the set temperature, the thermostat automatically closes the valve to
save energy and the display shows . The valve returns to the original
position after a certain time.
2. Select the menu item
Confirm the selection by pressing the
with the
button. The symbol
button once.
flashes.
3. First select the desired temperature to be set during the absence and
then the length in days and confirm the entry. The absence mode is
active as soon as the symbol lights up permanently in the display.
The absence mode can be switched off prematurely by pressing the
button once when the display is activated.
Control via FontaHome
Once the thermostat has been added to the app, you can access it by
clicking on the name or icon in the device overview on „My Home“.
Here you can view the current ambient temperature, target temperature
and history, as well as make settings and set frost protection and away
mode.
Display of temperature and valve position
When the display is active, the actual temperature and the position of
the valve are shown alternately.
off), stands for 50% open and
stands for a closed valve (heating
stands for an open valve. The set
target temperature is displayed by pressing the or
displayed next to the temperature.
key.
is also
25
26
| General | Details |
|---|---|
| Name | fontastic RAVL Wireless Radiator Thermostat User Manual |
| Make | fontastic |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.36 MB |
(1 votes, average: 5.00 out of 5)
Loading...
PECO TW180 Thermostat Instruction Manual
KETOTEK KTF0155 Smart Thermostat User Manual
STELPRO STE241 Low Voltage 24V Electronic Thermostat User Guide
bandary FC660 Smart Thermostat User Guide
EPH CDTP2 Room Thermostat Installation Guide
DAIKIN DKN509 Wireless Communicating Thermostat Instruction Manual
Danfoss Icon2 24V RT Room Thermostat Installation Guide
ENSTO ECO16BT-EX Floor Heating Thermostat User Guide
SIEMENS RDH100RF/SET Wireless Room Thermostat with LCD User Guide
EZAIoT 723 IPS Wired Smart Thermostat Instruction Manual