expert4house BHT-006 Series Thermostat Instruction Manual

1

2

Press icon  

FRI" and  

Use  

Press the icon  

hour by  

Press the icon  

four ꢀmes in a row. You can see "MON TUE WED YHU  

, and the minutes of ꢀme are flashing.  

to set the minutes;  

Step 6. Installaꢀon complete. See Fig 6.  

TECHNICAL DATA  

BEFORE WIRING AND INSTALLING  

Power Supply:95 ~240 VAC, 50~60Hz  

Current Load: 5A (water heating, gas boiler), 16A (electric heating)  

Sensor: NTC3950, 10K  

1. Read these instructions carefully. Failure to follow them could damage the  

product or cause a hazardous condition.  

2. Check the rathings given in the instructions and on the product to make  

sure the product is suitable for your application.  

3. Installer must be a trained, experienced service technician.  

4. After installation is complete, check out product operation as provided in  

these instructions.  

BHT-006 Series Thermostat  

WIFI Type  

again, the hour of the ꢀme will flash, set the  

;

Accuracy: ±1°C  

again, the temperature seꢂng will flash, set the  

;

Set Temp. Range: 5-35°C  

Room Temp. Range: 5-99°C  

temperature by  

This completes the seꢂng of periods1.  

In the same way, complete the seꢂngs of periods2, 3, 4 and 5  

(display periods1,2), 5 (display periods3, 4).  

Display Temp. Range: 5 ~ 99°C  

Ambient Temp.: 0~ 45°C  

Ambient Humidity: 5 ~ 95 % RH (Non Condensing)  

Storage Temp.:-10~ 45°C  

CAUTION  

HOME SCREEN QUICK REFERENCE  

Press the icon  

once more to enter the Saturday schedule  

Power Consumption: <1. 5W  

Timing Error: < 1%  

Electrical Shock or Equipment Damage Hazard. Can shock  

individuals orshort equipment circuitry.  

Disconnect power supply before installaꢀon.  

seꢂngs (you will see the SAT in the upper leſt corner of the screen).  

Repeat the above process to set the period and temp. and Sunday  

schedule.  

Weather  

Mode  

Shell Material: PC +ABS ( Fireproof)  

Installation Box: 86 * 86mm Square or European 60mm Round Box  

Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm2  

Protection Class: IP20  

Heating On  

Room Temp.  

Set Temp.  

Underfloor  

Heating On  

Press the icon  

once more to confirm and exit.  

Clock  

WIRING  

Buttons: Capacitive Touch Buttons  

Default seꢁngs for program schedule  

GA  

Temp.Display  

WEEKEND (SATURDAY)  

(6 shows on screen)  

WEEKDAY (MONDAY一FRIDAY)  

WEEKEND (SUNDAY)  

(7 shows on screen)  

Energysaving  

Power On/off  

Sleep mode  

Wifi  

AC95~240V  

N

(1 2 3 4 5 shows on screen)  

Time display  

Manual/  

FEATURES  

On Appearance  

1. LED display, more friendly interface;  

2. Touch operation buttons, smoother interaction;  

3. The ultra-thin embedded panel perfectly fits all kinds of walls;  

4. The borderless small rounded corner design is simple and atmospheric;  

5. Compatible with standard 86mm square cassettes and 60mm European  

cassettes to meet all installation environments;  

L

NTC  

For Water Heating/Boiler/Electric Heating  

Programmable  

TIME  

TEMPERATURE  

TIME  

TEMPERATURE  

TIME  

TEMPERATURE  

IP20  

M

。

。

。

Lock  

06:00  

20  

20  

C

Period 1  

Period 2  

20  

15  

C

06:00  

08:00  

11:30  

06:00  

08:00  

11:30  

13:30  

20  

20  

C

Up  

Thank you for purchasing our products, please read  

the following terms before installation and use:  

。

5

6

。

。

GB  

Period  

C

08:00  

11:30  

C

C

1

3

4

2

。

。

。

Week  

20  

C

Period 3  

15  

C

20  

C

AC95~240V  

N

。

。

。

L

Down  

RH  

Period 4  

13:30  

17:00  

NTC  

20  

20  

C

13:30  

17:00  

15  

22  

C

20  

20  

C

IP20  

Please confirm that this product is suitable for your heating  

equipment before installation;  

*Before installation or maintenance, please make sure to keep  

the power off;  

*Please strictly follow the wiring diagram for wiring installation;  

*Installation to the wall, please confirm that the fasteners are  

suitable for this product;  

*Do not pull the cable too hard, otherwise the product will be  

damaged;  

*If a hard plastic wire is used in the installation process, it must  

be bent to an appropriate angle in advance;  

*Please arrange for professionals to install;  

*Please contact the after-sales service for equipment failure,  

please do not try to repair it yourself;  

* After installation, please refer to this manual to check again to  

ensure normal and safe use, and keep this manual properly.  

。

Time  

。

。

LOAD  

N1  

C

Period 5(1+2)  

C

C

17:00  

22:00  

。

L1  

。

。

5

6

Period 6(3+4)  

22:00  

15  

C

15  

C

15  

C

22:00  

GC  

1

3

4

2

A separate schedule may be set for weekdays (Mon – Fri) and  

for weekends (Sat or Sun).  

Note: The weather and humidity will be synchronized within 1 hour after the  

device is connected to the Internet for the first time, and the weather  

will be synchronized every hour thereafter.  

AC95~240V  

N

On Funcꢀonality  

L

NTC  

IP20  

Dry Contact  

1. Rich function options, Modbus, WIFI, keycard, etc., to meet all your  

needs;  

2. Strict temperature control accuracy (±1℃) to provide the warmth you  

want;  

3. Power off protection, save all your settings safely;  

4. Provide weather information and humidity display  

5. Preset adjustment of 5+1+1 mode in a week, programmable setting of  

6 time periods a day, green energy saving,  

Less cost, more intelligent and environmental protection;  

6. Support the creation of product local groups/shares to achieve  

unlimited centralized control of the number of products/  

multi-terminal control;  

7. Checking the Temperature of Floor Sensor  

Press and hold the  

floor sensor.If there is no external external sensor, "err" will be displayed.  

Press the  

temperature  

/

in the power-on state to display the humidity and set  

arrow for 5 seconds to display the temp. of  

1

3

4

2

Note:  

GA is for water heaꢀng;  

GB is for electric heaꢀng;  

GC is for water/gas boiler;  

8.Seꢁng the Funcꢀons and Opꢀons  

During Power Off, press and hold  

order to reach system function. Then press  

the available functions , and use the  

available options. All settings are confirmed automatically.  

OPERATION  

During Power On  

and  

for 8 sec. in the  

to scroll through  

arrows to change the  

NTC and Modbus is opꢀonal.  

1. Power On/off: Press  

to turn the thermostat on/off.  

2. Funcꢀon & Programmable  

Touch to change between manual mode and programmemode.  

In manual mode, will show on the display,  

INSTALLATION  

Your thermostat is suitable for istallaꢀon within a standard 86mm  

paꢁress box or European 60mm paꢁress box.  

Code  

Funcꢀon  

Seꢁng and opꢀons  

Default  

Temperature  

compensaꢀon  

1

-9 to 9 ℃ (for internal sensor)  

-3  

7. Perfect access: Tmall Genie, Amazon echo, Google Home, full  

experience new voice control method;  

In programmable mode,  

will show on the display.  

Deadzone  

Temperature.  

2

3

1-5℃  

1

ABOUT YOUR THERMOSTATS  

Step 1. Keep power off. See Fig 1.  

Step 2. Remove the mounꢀng plate by pushing the LED assembly. See Fig 2.  

00:All buꢁons are locked except power buꢁon.  

01:All buꢁons are locked.  

3. Seꢁng Temperature  

Buꢁon Locking  

Sensor typer  

01  

The BHT- 006 range has been developed to control electric  

underfloor, water heating or water/ gas boiler systems. These units  

are designed for use in commercial, industrial, civil and domestic  

properties  

60.0  

In the programming mode, the temperature setting and time setting will be  

locked. If the user wants to adjust, he must first adjust the thermostat to  

DIMENSION:(mm)  

In:Internal Sensor(to control the temp.)  

Ou:External Sensor(to control the temp.)  

AL:Internal/External Sensor (Internal sensor to  

control the temp., external sensor to limit the temp.)  

4

manual mode by pressing the  

In the mode of manual, press  

4. Adjusꢀng/Seꢁng the Clock  

key.  

AL  

to set the desired temperature.  

5

6

Min.Set Temp.  

Max.Set Temp.  

5-15℃  

05  

35  

+0.1  

88.0  

MODEL DEFINITION  

-0.1  

Press  

Press  

to set minute, hour and weekday. By using the  

once more to confirm and exit.  

.

15-45℃  

GA: Water heating, 5A  

00 : Display both set temp. and room temp.  

01 : Display set temp. only  

7

Display Mode  

00  

00  

45  

Step 3. Connect power supply, load into the appropriate terminals.  

(see "Wiring your thermostat" for details and Fig 3).  

Step 4. Fix the mounꢀng plate into the wall with screws in  

the box. See Fig 4.  

GB: Electric floor Heating, 16A  

GC: Water/Gas Boiler, 5A  

L: Backlight  

5. Locking your Thermostat  

Low temperature  

protecꢀon seꢂng.  

Press and hold the  

for 5 seconds to lock/unlock your thermostat  

8

9

A

0-10℃  

In item 3 of high senior options, you can select full lock or half lock.  

N: Modbus Communication  

W: Wifi  

S2: Both internal sensor and floor external sensor  

High temperature  

protecꢀon seꢂng.  

25-70℃  

11.9  

37.5  

6. Adjusꢀng/seꢁng the Program Schedules  

00: Non-energy saving Mode  

01: Energy saving mode  

When Wi-Fi connection is made, your thermostat will automatically  

accept the program schedule made via the APP on your device.  

If the schedule is set through the APP, after the APP completes the  

schedule setting, the thermostat needs to be turned off once.  

Economy Mode  

0

For example: BHT-006GA  

B

C

Economy Temp.  

0-30℃  

20  

Dayꢀme display  

brightness(6:00-22:00)  

Brightness at night  

(22:00-6:00)  

When set to 0, the device will run  

0-8  

1

1

for 10 seconds aſter inacꢀvity.  

The screen will go completely  

off with no display.  

0-8  

If the thermostat does not establish a Wi-Fi connection, manually set the  

schedule see below for detailed instructions: To set the program  

schedules throughyour thermostat (NOT via your smartphone/tablet)  

simply follow theinstructions as below:  

Please note: Setting the programme schedule through your  

thermostatcan only be carried out if there is no WiFi  

In the box you will find  

D

E

F

Thermostat  

User Guide  

QC Passed  

1pc  

1pc  

1pc  

Screws  

2pc  

1pc  

Reset  

00: No factory reset; 01: Factory reset  

00  

Step 5. Fix the thermostat body and the mounꢀng plate by the lower  

buꢁon. See Fig 5.  

Wall plate  

Version number  

U2  

(Floor sensor is Optional)  

connection between yourthermostat and smartphone/tablet.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	expert4house BHT-006 Series Thermostat Instruction Manual
Make	EXPERT4HOUSE
Language	English
Filetype	PDF (Download)
File size	0.66 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• EXPERT4HOUSE

expert4house BHT-006 Series Thermostat Instruction Manual Overview

Summary of Contents

• Page 1: Press the icon to set the minutes. Read these instructions carefully. Installer must be a trained, experienced service technician. Power Supply: 95 ~240 VAC, 50~60Hz. Current Load: 5A (water heating, gas boiler), 16A (electric heating). Accuracy: ±1°C. Set Temp. Range: 5-35°C. Display Temp. Range: 5 ~ 99°C. Caution: Electrical shock or equipment damage hazard. Your thermostat is suitable for installation within a standard 86mm press box or European 60mm press box.
• Page 2: AP mode About WiFi Network distribution mode Wi-Fi connection EZ mode Before using your Wi-Fi thermostat for the first time, you must configure the Wi-Fi signal and settings through your smartphone or tablet. Download your app Connect smart voice audio guide Share the thermostat with your family Your thermostat carries a 24 months warranty from the date of purchase.