ELMEKO THRV 22 Double-Thermostat Owner’s Manual

1

2

3

4

THRV 22 DOPPEL-TEMPERATURREGLER  

THRV 22 DOUBLE TEMPERATURE CONTROLLER  

ANWENDUNG APPLICATION  

Dieses Doppelthermostat überwacht die Temperatur im Schaltschrank. Es wurde speziell zur  

Ansteuerung der Kombination Lüfter und Heizgerät entwickelt. Es handelt sich hierbei um zwei  

unabhängig voneinander schaltende Thermostate mit hoher Schaltleistung, in einem kompakten  

Gehäuse.  

This double thermostat monitors the temperature in the switching cabinet. It was specially  

developed to control the combination of fan and heater. It is two independently switching  

thermostats with a high switching capacity in a compact housing.  

EIGENSCHAFTEN  

FEATURES  

▪ Temperaturregler für Lüfter und Heizung  

▪ 1x Öffner-Kontakt bei steigender Temperatur zur  

Regelung der Heizung  

▪ Temperature controller for fan and heater  

▪ 1x NC contact at rising temperature to control the  

heater  

▪ 1x Schließer Kontakt bei steigender Temperatur zur  

Regelung vom Lüfter  

▪ 1x NO contact at rising temperature for regulation of  

the fan  

▪ Hohe Leistungskapazität  

▪ High power capacity  

▪ Einstellbare Temperatur 0 – 60 °C  

▪ Befestigung auf DIN-Schiene  

▪ Adjustable temperature 0 – 60 °C  

▪ Mounting on DIN rail  

▪ 10 A Schaltleistung bei 250 V AC  

▪ 10 A switching capacity at 250 V AC  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	ELMEKO THRV 22 Double-Thermostat Owner’s Manual
Make	ELMEKO
Language	English
Filetype	PDF (Download)
File size	0.17 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• ELMEKO

ELMEKO THRV 22 Double-Thermostat Owner’s Manual Overview

Summary of Contents

• Page 1: THRV 22 double temperature controller This double thermostat monitors the temperature in the switching cabinet. It was specially developed to control the combination of fan and heater. It is two independently switching thermostats with a high switching capacity in a compact housing. Features Temperature controller for fan and heater 1x NC contact at rising temperature to control the heater 1x NO contact at rising temperature for regulation of the fan High power capacity Adjustable temperature 0 – 60 °C Mounting on DIN rail 10 A switching capacity at 250 V AC
• Page 2: Technical data includes specifications for the THRV 22 model. The permissible operating voltage ranges from 12 V DC to 48 V DC and 125 V AC to 250 V AC. The output switch contact consists of one normally closed and one normally open contact. The sensor switching system utilizes an internal bimetal. Switching contact resistance is less than 10 mOHM. The switching difference, or hysteresis, is ± 4 K. The maximum switching capacity is 10 A at 250 V AC and 15 A at 125 V AC. The control range operates within a temperature range of -25 °C to +80 °C. The degree of protection is rated at IP20. The service life exceeds 1,000,000 switching cycles.
• Page 3: Connection diagram Function Switch contact NC type Switch contact NO type Contact status Set point (thermostat value set) Switching point (contact closing temperature) Negative tolerance of set point Positive tolerance of set point Hysteresis
• Page 4: Zubehör Accessories Bezeichnung Type Beschreibung Description Artikelnummer Part number Montageset Grundträger mit 2 Schrauben Installation set with 2 screws Die Montage des Reglers erfolgt auf einer 35 mm DIN-Normschiene. The controller is mounted on a 35 mm DIN standard rail. Der THRV 22 verfügt über interne Sensoren. The THRV 22 has internal sensors. Nach der Montage ist der Regler wie im Anschluss-Schaltbild zu verdrahten. After mounting, the controller must be wired as shown in the wiring diagram. Nach der Installation ist daher die korrekte Wirkrichtung und einwandfreie Funktion der Regelung zu überprüfen. After installation, therefore, the correct operating direction and proper functioning of the control must be checked. Die Einstellung des Schaltpunktes wird mit einem Schlitzschraubendreher vorgenommen. The switching point is set with a slotted screwdriver. Montage Mounting Demontage Removal