BEOK TGW60 Glass Screen Thermostat Instruction Manual
1. Connect the power box according to the wiring diagram.
2. Separate the power supply from the control board cable.
3. Screw the power supply into the box of 86.
Press M to switch operation between manual mode and programmable
mode.
Defaulted Temp.
Period
Period Icon Defaulted Time
6:00
1
2
3
4
20℃
4. Connect the power board to the board line, and align the buckle at 30
degrees to complete the installation.
8:00
11:30
12:30
17:30
22:00
16℃
16℃
16℃
22℃
16℃
Week
X. ATT:
5
6
1
Thank you for buying this product!
8:00
22℃
Weekend
Please read this manual for complete instructions on installing and
operating your thermostat. If you require further assistance, please
feel free to contact us.
23:00
16℃
2
Remark:
The defaulted temperature of period3 and period4 is the same as
period2. Please change it according to the request.
In the box you will find:
Model
Thermostat
User Manual
Screws
TGW60-EP
TGW60-WP
TGW60-WPB
7. Advanced Setting
√
√
√
√
√
√
In the state of power-off, press the M key and the key for 5 seconds to
enter the advanced option setting.
Press M to enter the next option, press and
to exit.
√
√
to adjust, and press
√
√
External sensor
Setting And Options
Factory Defult
Display Code
1ADJ
Function
Temp.
compensation
-2℃
-9.9-9.9℃
IN: Internal sensor
OUT: Floor sensor
ALL: Both internal
Sensor selection
IN
2SEN
sensor and floor sensor
Our Service:
Modify the temp.
limit
We offer the warranty of 24 months from the sales day.
3LIT
4DIF
5LTP
5-60℃
35℃
During the warranty, if it is belong to the quality issue, we will fix or
replace them for you by free after test them.
Temp. difference
start
0.5-10℃
1℃
OFF：Close anti-frozen
If it is not quality problem or beyond the warranty time, we will
charge for the after-sales service.
Antifreeze function
OFF
ON：Open anti-frozen
0: 7 days programmable
1: 6+1 programmable
2: 5+2 programmable
00: close the main and
auxiliary reversal
Weekly
programming mode
6PrG
7rLE
2
Primary and secondary
reverse selection
00
BEOK
02: auxiliary reversal
Passive linkage
output delay time
8dLy
9HlT
0
0-5min
35-95℃
Set upper temp.
limit
60
long press up button to
adjust the display “---”,
press power button to
restore the factory settings
TGW60 Heating Thermostat
Restore factory
defaults
-
RFAC
Sensor error:
Please select the right sensor mode. If select the different mode or there
is error of sensor, Err will display on the LCD screen, the thermostat will
stop heating till the problem is solved.
IX. Installation Instruction
This product is suitable for standard 80*80mm wall box and 60 mm
european round box.
(2)
(1)
(4)
(3)
| General | Details |
|---|---|
| Name | BEOK TGW60 Glass Screen Thermostat Instruction Manual |
| Make | BEOK |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.2 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BEOK Color TFT-LCD Heating Thermostat User Manual
BEOK TDS21WIFI-AC Fan Coil Thermostat Instruction Manual
BEOK TGR85-EP Underfloor Heating Thermostat User Guide
BEOK TDR89 Zigbee Room Thermostat User Guide
BEOK BOT-R7X Wireless Gas Boiler Heating Thermostat Instruction Manual
BEOK TDS23 Wi-Fi Fan Coil Thermostat Instruction Manual
BEOK TGP53 China Piano Buttons Underfloor Heating Thermostat User Guide
beok TGW60 Thermostat User Guide
BEOK TS4 Series Wi-Fi Touch Screen Thermostat User Manual
BEOK TGP53 Wifi Thermostat User Guide
Hotwire HWGL2 Dual Programming Thermostat Instructions
Moes BHT-3000 Series Thermostat User Guide
SALUS 091FLRF Wireless Room Thermostat User Guide
EMERSON Thermostat Common Wire Kit SA11 Instruction Manual
BEOK TGP508 Vertical Buttons Underfloor Heating Thermostat User Guide
ENGO CONTROLS E10W230WIFI WiFi Temperature Thermostat User Guide
marmony MTC-40 Radio Controlled Room Thermostat Instruction Manual
NEOMITIS RTE0RFA Wireless Digital Room Thermostat and Receiver Instruction Manual
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Zhongjin STN731RF Thermostat Instruction Manual