550-13060 HVAC-Thermostat Niko Home Control Instructions
• behind a curtain.
• Compatible with the Niko Home Control solar mode
Do not allow air to circulate behind the HVAC thermostat. If needed, fill in any gaps in the flush-mounting box or bus cable duct using PU foam. Push
buttons with display are integrated in a bridge. The thermostat conforms to IEC60730-2-9, EN 50491-5-2, EN 50491-2 and EN 50090-2-3
• Screen type: lit colour display with the dimensions 45 x 45 x 32 (HxWxD)
• Input voltage: 26 Vdc (SELV, safety extra-low voltage)
• Flush-mounting frame
– 1 mm-thick metal
– galvanized on all sides after cutting, even on the cut edges
– with 4 grooves with screw hole of 7 mm
– with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Fixing method
– with claws that can be rotated open using screws with a slotted screw head (slot 0.8 x 5 mm), for mounting in a flush-mounting vox with grip
surfaces
– depth of engagement of claws: 31 mm
– claws turn back completely when loosened
• Centre-to-centre distance
– Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
– vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
– vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm,
the bases support each other and the centre-to-centre distance is guaranteed.
– horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
– extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
• End border: The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made
of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangu-
lar openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the
faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks
out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in
the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct
positioning of the faceplate in relation to the central plate.
• Marking: CE
www.niko.eu
| General | Details |
|---|---|
| Name | 550-13060 HVAC-Thermostat Niko Home Control Instructions |
| Make | niko |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.04 MB |
(1 votes, average: 5.00 out of 5)
Loading...
niko 550-00550 Home Control HVAC Thermostat Instructions
Carrier 33TWSPL-4 Wifi Stat Plus Thermostat Owner’s Manual
SCHRACK TECHNIK EV103311 Analog Thermostat User Manual
VIMAR 02971 Smart Automation Rotary Dial Thermostat Instruction Manual
SALUS CONTROLS IT700 Smart Thermostat Instruction Manual
GENERAL LIFE HT25 Smart Room Thermostat User Manual
nVent RAYCHEM Elexant 3500i Electronic Thermostat Installation Guide
Honeywell Y460A2003 Creative Series Thermostat Installation Guide
Danfoss RAS-D2 Radiator Thermostat Installation Guide
MOES BRT-100 Radiator Thermostat User Guide
Danfoss RET-MD Electronic Intelligent Dial Setting Thermostat Installation Guide