Home > Tio > Tio TEVO Smart RF Wireless Thermostat User Manual

Tio TEVO Smart RF Wireless Thermostat User Manual

2

Configuration Menu

Power OFF your thermostat and long press to open up

the menu. During this menu, short press to edit the

Thermostat setting order: Mon-Fri, Sat, Sun >Time >

Temperature (4 periods). The thermostats time zones are

preprogrammed according to Table 1.

HW timer setting order: Mon-Fri ,Sat, Sun > Period 1 >Time

on >Time off (4 periods). (Table 2)

Thermostat program Factory setting as Table 1:

Operation

TEVO THERMOSTAT MANUAL

There are three core modes to select from:

desired parameters. Press

to confirm the settings.

1. UFH Thermostat 2. Timer 3. Radiator & Timer

1. Thermostat only operation

Default

Function

No.

Setting Range

Press this button to power ON/OFF your thermostat.

Working mode

select

1: Thermostat 2: Timer 3: Thermostat & HW Timer

Period 2

Period 3

Period 4

Time period

Set Temp

Week

Period 1

Time setting: Press button to set min/hour/week

Manual/Program setting:

Set

Temp

Set

Temp

Set

Temp

Set

Temp

System Select

rA: Radiators

UF : Under Floor Heating

Time

Manual mode: Press

button to select manual mode.

22℃

8:00

18:00

22℃

22:00

Mon

6:00

16℃

Temperature

compensation

-9-9℃

will show on the bottom left corner of the screen, press

Tue

22℃

16℃

22℃

16℃

18:00

22:00

set the desired temperature.

Dead Zone

Button lock

1-5℃

Wed

Thur

16℃

6:00

8:00

Program Mode: Press

When you choose this mode,

for 5 seconds to set the desired four periods of time and

temperature per day.

4.Temperary mode: During program mode, if you need to

change the temperature, both

preprogrammed setting will return in the next period. (Table 1)

5. Child lock set: Press an hold

unlock your thermostat.

6. Factory setting: Press for 7 seconds to enter program

mode. Press and hold for 5 seconds until the "def" icon

flashes on screen. Your TEVO device has now been reset to

factory settings.

button to select program mode.

Application

18:00

22:00

will show, press and hold

0: All lock except power button 1: All lock

Our TEVO thermostat is used in synergy with the wireless

wiring centre box. The TEVO communicates with our wiring

centre through our wireless gateway using Zigbee protocol.

Our thermostat comes with radiator, hot water and underfloor

heating control capabilities. App controlled via SmartLife and

Tuya found on both iOS and Andriod. Operated via 2x AA

batteries.

Fri

Sat

Sun

6:00

18:00

22:00

Sensor selection

IN: Inner sensor OU: External sensor ALL: Dual sensors

22℃

16℃

8:00

Maxmum

Temp range

18:00

22:00

16℃

6:00

22℃

20℃-45℃

icons will show on LCD. The

Minimun

Temp range

Table 1

Timer program Factory setting as Table 2:

5℃-20℃

High temp

protection

setting

for 7 seconds to lock/

20℃-70℃

2℃-10℃

Period 2

Period 3

Period 4

Time period

Period 1

Anti-freez

temp range

LCD DISPLAY REFERENCE

Low Battery

ZIGBEE

Lock

Set time

Week

Time on

Time off

14:00

Time off

22:00

0: Both room temp and setting temp 1: Setting temp only

0: OFF 1: ON

Display mode

：：

-- -- -- --

Mon

6:00

8:00

12:00

18:00

Anti Freez

switch

Tue

：：

-- -- -- --

14:00

18:00

22:00

week

：：

-- -- -- --

Wed

Thur

6:00

8:00

ECO Mode

0: OFF 1: ON

：：

-- -- -- --

14:00

18:00

22:00

2.Timer only operation

The LCD will display as seen in Fig 1-1

ECO

Temperature

Room Temp

Set Temp

5℃-35℃

Time period

Fri

Sat

Sun

6:00

：：

-- -- -- --

14:00

18:00

22:00

Floor Temp

FLOOR

：：

-- -- -- --

Radiators: When you use the radiators system, there is

no pump utilisation.

Under Floor Heating: When you select the UFH system, there

will be pump output.

8:00

ECO

Holiday Mode

Am,Pm

Time

TIMER OFF

TIMER ON

：：

-- -- -- --

14:00

18:00

22:00

6:00

12:00

Manual

H/W Timer

Heat On

Program

Table 2

Set

How to pair with your wireless wiring centre

Power OFF your thermostat and press both and over

7 seconds. Wireless center box or receiver should also be

ON during pairing. When successfully paired, the LCD will

display the zone channel it has paired with. See Fig 1-5

(Wiring centre will have a 3 minute delay)

Low battery alarm

Low Battery icon will display when the battery is down to

10%. The icon will flash when the battery is down to 1%. At

this stage you should replace with new batteries immediately

as the thermostat will stop functioning.

Time

Down

Power

Menu Up

UFH Thermostat

Fig 1-1

Fig 1-2

Fig 1-3

Features

◆Simple installation

Timer function symbol

Press menu button to set the function and press

select one of AUTO,HOLD or OFF.Then press

confirm your selection.

Program mode: When you select AUTO (programmable)

mode (Fig1-2) long press to enter program setting. The order

is Mon-Fri > Period 1> Time on > Time off > Period 2 > Time

on > Time off > Period 3 >Time on > Time off > Period 4

(Table 2)

HOLD mode:Press to select HO1(HOLD) (Fig1-3). You

can adjust the time setting between: 00:00-23:59.

will display on screen.

H/W is channel 9

button to

When the LCD displays "---", this means that thermostat

has enter standby (wiring centre and gateway will also be in

standby). If you have successfully paired your devices, the

LCD will display the zone that it is paired with.

Anti Freeze Function

◆Acrylic face plate

When thermostat detects a room temperature of lower than or

equal 5℃, the thermostat will activate the heating. When

thermostat detects a room temperature of 8℃, heating will turn

OFF.

Holiday mode

Long press for 7 seconds to enter holiday mode.Then short

◆Large back lit display

◆Elegant chrome frame

NOTE:

◆Feather touch control panel

Flashing icon means RF does not match code.

No icon means no RF signal.

◆4 period per day programming

◆Simple one-touch temperature control override .

press

the parameters you need. Press

button to set the day and temperature press to set

to exit this. Duing holiday

◆Pre-set temperatures maintained within +/- 1°C

Always on screen means RF working normal.

If your thermostat signal is not stable, you should change

wireless com-modification channel. Long press over 7

◆Internal and external sensors allow control of both air

and/or floor temperatures

mode, H/W timer is OFF. To exit holiday mode, short press

ERR CODE

3.Thermostat and HW Timer

◆Suitable for installation in a standard single pat tress box

or European 60mm round box

seconds to change the channel. Press

between 0-3.

button to change

When thermostat sensor is broken or has a problem, the LCD

will display “ERR”.

Pairing with Zigbee gateway

1.When you select this mode, the LCD will display

same time. When power on, short press to select thermostat

function and hot water timer function. Press to confirm.

at the

By changing channel 1 successfully, the others will change

automatically.

◆ZIGBEE communication

Long press

button over 7 seconds when thermostat

Technical Data

powered ON. When the thermostat displays ”---” it has ented

pairing mode. If the connection is successful the screen will

auto return to the main screen.

Short press to enter

Then press

mode

thermostat function.

button to select manual or program

Check pairing number and wireless zone channel

Long press and over 7 seconds to check the pairing

code and wireless channel.

◆Sensor：NTC 3977 10K

◆Accuracy：±1℃

Short press to select

(AUTO program), HOL(HOLD) and OFF. When HOL is

selected, you can adjust the time setting range: 00:01- 23:59

HW timer. Press to select AUT

◆Power Consumption：< 1.5W

◆Timing Error：<1％

◆Power Supply：2AA batteries

◆Shell material：PC+ABS (flame retardant)

◆Dimension：86x86x26mm

◆Ambient Temp.：0-45℃，5-95％RH

（Non-condensing）

Fig 1-5

Program model: Long press for 7 seconds to select

thermostat function and

to confirm. (Fig 1-4).

HW timer program. Short press

001 : Paring code

◆Storage Temp.：-5-55℃

-3- ：Wireless zone channel number. (Factory setting: 0)

Fig 1-4

◆ Installation Hole distance: 60mm

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Tio TEVO Smart RF Wireless Thermostat User Manual
Make	Tio
Language	English
Filetype	PDF (Download)
File size	1.45 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Comments are closed.

Tio Instructions & User Manuals

Tio 230v Thermostat User Manual

TX1000 Thermostat Instruction Manual

TIOEVO0003 TEVO Wireless Thermostat User Manual

Get the free PDF manual for the Tio TEVO Smart RF Wireless Thermostat User Manual and access setup steps, usage instructions, and troubleshooting tips. 👉 View online or download now to keep your thermostat running smoothly!

Tio TEVO Smart RF Wireless Thermostat User Manual Overview

Summary of Contents

Page 1: Configuration menu allows access to thermostat settings. Thermostat setting order includes Mon-Fri, Sat, Sun, time, and temperature. HW timer setting order follows a similar structure. The thermostat has three core modes: thermostat, timer, and radiator & timer. Manual and program settings allow for temperature adjustments. Child lock and factory reset options are available for user convenience. The TEVO thermostat operates with a wireless wiring center using Zigbee protocol. Low battery alarm activates when battery levels drop to 10%. Anti-freeze function activates heating when room temperature is below 5°C. The device features a large backlit display and simple one-touch temperature control.
Page 2: Settings on app Timer function menu interface Zigbee connection & app Thermostats trouble shooting To help with pairing your device for the first time, we recommend having your phone close to the router or modem. Download the Smart Life or Tuya Smart app or scan the QR codes below. Through the app, you can control the devices with voice control by integrating Amazon Echo or Google Assistant. The app allows you to add and control a variety of devices at once. You can program your thermostat's heating and timer functions for each day over four time periods. Connect to Zigbee gateway by powering on your wireless gateway and following the app instructions. As this thermostat has a combination of different function capabilities, there are altering setting menu interfaces for you to familiarize yourself with.