Provirtec TH-01 Smart Thermostat User Manual
d. To unpair, in the Prodigytec APP under the TempMaster
smart thermo-hygrometer settings page, delete the smart
thermo-hygrometer. The thermostat will then revert to
monitoring using its built-in thermohygrometer.
Auto Mode: 68°F-86°F
a. Tap , choose , after 3 seconds, it will automati-
cally enter to the Auto mode.
b. In auto mode, you need to set the heating tempera-
ture and cooling temperature in turn. Slide the slider to
set the heating temperature, and confirm the heating
temperature after 3 seconds. You can slide the slider
again to set the cooling temperature, after 3 seconds,
complete the setting.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, any cause harmful
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more
of the following measures:
For remote access, wait for the network to reconnect; the
thermostat will automatically reconnect to WiFi.
N/O - Current HVAC Mode (Cooling/Heating):
8. Warranty
6. Q&A
9. Contact US
5. How to Use
Due to HVAC mode switching for system protection, the
HVAC system completes the current cycle before switching
modes. This may result in a temporary inconsistency
between set and operating modes, typically lasting up to 3
minutes. Please wait for 3 minutes for synchronization.
12-moth warranty for the product.
At PROVIRTEC, we value your experience. If you have
any questions about our products, click ‘ask a question’
in our store and email us. Our dedicated team will
respond promptly to provide the support your need.
Thank you for choosing PROVIRTEC, and we look
forward to serving you.
1. HVAC system control failure or abnormal hot and
cold control.
Please ensure correct wiring connections. Incorrect or
abnormal wiring may cause control issues.
1) Mode Settings
60-day money-back guarantee for quality issues.
Note: Damages caused by the disregard of this user
manual are not subject to warranty.
6. WiFi disconnection: can an independent thermo-
hygrometer still transmit data to the thermostat?
When the current temperature is higher than the
set value, activate the cool mode.
7. Notice
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
Yes, an independent thermohygrometer uses BT locally
to send collected temperature and humidity data to the
thermostat, independent of the thermostat's Wi-Fi
connection. This thermohygrometer accurately captures
your perceived temperature to ensure precise adjust-
ment, preventing inaccuracies in indoor temperature
control due to distance from the thermostat.
When the current temperature drops below the set
point, turn on the heat mode.
2. How to set Schedules, Scenes, and Hold time?
Please download the "Prodigytec" app, follow the
instructions to connect the thermostat, and set these
features through the app.
Tips:
Turn on the heating or cooling system as needed to
keep your home within the configured setting range.
a. Time display, Scene mode, Hold duration, schedule,
and binding of thermhygrometer require initial setup and
connection to the thermostat via the app.
3) Deadband Temperature
(1) Reorient or relocate the receiving antenna.
The HVAC system system supports auxiliary heating
to maintain the set temperature.
3. Unable to adjust mode or temperature via touch.
Please check if Child Lock or Hold mode is enabled.
Operations are disabled under Child Lock, and adjusting
the set temperature is ineffective under Hold mode.
(1) this device may not cause harmful interference, and
a. To prevent frequent switching of the HVAC system
and ensure precise temperature control, you can set
the deadband temperature via the app. The available
temperatures are ±0.3°C/0.5°F, ±0.5°C/1°F, ±0.8°C/1.5°F,
and ±1°C/2°F.
b. When connected to the app, you can choose between
WiFi or BT connection modes. WiFi is suitable for remote
control, while BT is suitable for local control within the
home (up to 80m/262ft).
(2) Increase the separation between the equipment and receiver.
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Turn off the HVAC system system to stop cooling or
heating.
(3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
7. How to Pair and Unpair the Thermo-Hygrometer
When Using the Thermostat：
4. Unable to connect to WiFi.
Warning: Changes or modification not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
c. Auto mode requires sequential setting of heating and
cooling temperatures. Slide the slider set the heating
temperature; After 3 seconds, slide it again to set the
cooling temperature, repeating this cycle as needed.
2) Examples of Use
Heat Mode: 68°F
Ensure you are using a 2.4 GHz network. When
connecting, position the thermostat as close as possible
to the router.
(4) Consult the dealer or an experienced radio/TV
technician for help.
To maintain compliance with FCC’s RF Exposure
guidelines, this equipment should be installed and
operated with minimum 20cm distance between the
radiator and your body: Use only the supplied antenna.
b. The default setting is 0.5°C/1°F. For example, if the
cooling temperature is set to 68°F, the HVAC system will
stop cooling when the current temperature is ＜ 67°F and
will start cooling when the temperature ＞69°F.
a. Follow the steps to add the Provirtec smart
thermo-hygrometer to the Prodigytec app.
b. Similarly, follow the steps to add the TempMaster smart
thermostat to the Prodigytec app.
a. Tap
, choose
, after 3 seconds, it will automati-
Note: This equipment has been tested and found to
comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provided reasonable protection against
harmful interference in a residential installation.
cally enter to the heat mode.
b. Slider the slider to set the heating temperature to
68°F, it takes effect 3 seconds later.
5. WiFi disconnection: can TempMaster smart
thermostat still operate？
Yes, you can adjust the temperature directly on the thermo-
stat, ensuring normal operation. You can also adjust it locally
via BT on your phone within an up to 80m/262ft range.
d. The Provirtec smart thermo-hygrometer connects to
the thermostat via BT with a range of up to 80m/262ft.
Its data collection is not affected by the thermostat's
WiFi network.
c. Note: To avoid frequent switching of the HVAC system,
which can impact its lifespan, it is recommended to set
the deadband temperature to above 1°F.
c. Open the homepage of the TempMaster smart thermo-
stat or settings page, and follow the steps to pair the
thermo-hygrometer.
8
9
10
11
12
13
14
16
17
| General | Details |
|---|---|
| Name | Provirtec TH-01 Smart Thermostat User Manual |
| Make | Provirtec |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.33 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
REHAU NEA H 24 V Room Thermostat Instruction Manual
PELICAN TC3 Commercial Connected Thermostat Installation Guide
Carrier 33TWSPL-4 Wifi Stat Plus Thermostat Owner’s Manual
technolysis HYT002-WIFI WI-FI Digital Heating Thermostat User Manual
HERSCHEL T-MT Mains Powered WiFi Thermostat Instruction Manual
TELLUR TLL331431 WiFi Smart Ambient Thermostat TSH02 User Manual
KETOTEK F0155 WiFi Thermostat Instruction Manual
BEOK TDS23 Wifi Thermostat Owner’s Manual
Moes WHT-PJ01 Smart WiFi Thermostat User Manual