Honeywell CT2800 Programmable Thermostat Installation Guide
Step 3. Install Mounting Plate
Fig. 5.
a. Separate the mounting plate from the thermostat using a coin, as
shown in Fig 5.
b. Position the mounting plate on the wall. Be sure the mounting plate is
flush against the wall and none of the wires are trapped behind it.
c. Level the mounting plate and use a pencil to mark the center of the
mounting plate screw holes.
d. Remove the mounting plate and drill holes at the locations marked.
•
•
For drywall, drill two 3/16-inch holes.
For plaster or wood, drill two 7/32-inch holes.
M20139
Fig. 6.
e. If installing in drywall, gently tap the anchors (provided) into the drilled
holes until they are flush with the wall.
f. Reposition the mounting plate over the holes, pull the wires through
the wiring opening, and loosely insert the mounting screws into each
of the drilled holes or anchors (Fig. 6).
g. Make sure the mounting plate is level and tighten the mounting
screws.
M20129
Fig. 7.
✓
Check your progress
The mounting plate is now mounted on the wall and should look like
Fig. 7.
M20128
5
69-1638—1
firealarmresources.com
| General | Details |
|---|---|
| Name | Honeywell CT2800 Programmable Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.35 MB |

Honeywell T6 Pro Programmable Thermostat User Manual

Honeywell D1-528 Direct Thermostat Installation Guide

Honeywell FocusPRO P200 Programmable Thermostat User Guide

Honeywell RCHT8610WF Series Smart Thermostat Installation Guide

Honeywell T9 Smart Thermostat Installation Guide

Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide

Honeywell TL116A Thermostat Installation Guide

T10 Pro Smart Thermostat with Redlink Room Sensor

Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide

Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide





































