HBX THM-0100 Programmable Thermostat Instruction Manual
Cooling Adjustment Steps:
1) Room Temp - Set this value to be
the desired room target. Range from
32°F to 200°F.
COOLING ADJUSTMENT
1) ROOM
2) SENSOR 1
3) C OR F
4) BACKLIGHT
5) TIME
70°F
FLOOR
°F
OFF
2) Sensor 1 - Enable the feedback
sensor as None, Floor, Room,
Outdoor or Room Average.
1:05am
a) None - No external sensor is
connected to the thermostat.
b) Floor - The external sensor is
used to display floor temperature.
c) Room - The external sensor is used to control the room temperature.
d) Outdoor - The external sensor is used to display outdoor temperature.
e) Room Average - This setting averages the external sensor and internal
sensor to control the room temperature.
3) Celsius or Fahrenheit - Set the display value as either Celsius or Fahrenheit.
4) Backlight - Use this option for dimming or powering down the backlight
when not in use (Select On or Off).
5) Time - Set the time for your appropriate region or time zone.
Setpoint Adjustment Steps:
1) Setpoint - Set this value to be the
SETPOINT ADJUSTMENT
desired Setpoint target.
1) SETPOINT
2) MODE
3) DIFF
4) LAG TIME
5) C OR F
6) TIME
130°F
HEAT
20°F
0S
°F
1:05am
Range from 32°F to 200°F.
2) Mode - Select between Heat
mode or Cool mode.
3) Differential - A differential of
10° is 5° above setpoint and 5°
below setpoint. Range from 2°F to
60°F.
4) Lag Time - Set the desired lag time interval.
Range from 0 seconds to 240 seconds.
5) Celsius or Fahrenheit - Set the display value as either Celsius or Fahrenheit.
6) Time - Set the time for your appropriate region or time zone.
4
| General | Details |
|---|---|
| Name | HBX THM-0100 Programmable Thermostat Instruction Manual |
| Make | HBX |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.39 MB |

HBX THM-0500 Touch Screen Programmable Thermostat Instruction Manual





















