Goldair GEPH213 EcoPanel Heater with Thermostat Instruction Manual
Wall Mounting & Position Instructions cont.
Orientation.
The heater must be mounted on the wall with the power switch in the top right hand
position as shown below.
Note: Do not run power
cord behind the heater.
THIS
WAY UP
NOTE: Your Goldair EcoPanel Heater should be installed with at least 300mm clearance from the floor
and any other surrounding parts including other appliances, side walls, ceilings, shelves and soft
furnishings.
1. Mark the positions of the four holes to be
drilled on the wall. Ensure there is a 300mm
clearance on all sides of the heater.
4. Install the panel heater onto the four rail fittings
matching the four holes on the heater.
5. Screw the four screw bolts into the plastic rail
fittings.
6. Put the caps onto the end of the screw bolts. It is
recommended to use some normal glue to stick
the caps onto the bolts steadily.
2. Drill holes with an appropriate drill bit for the
wall surface you are mounting the heater on
to.
3. Insert the plastic rail fittings into the holes.
To remove the unit from the wall, simply remove the bolt caps, unscrew the bolts with a screw driver and take
the heater down.
| General | Details |
|---|---|
| Name | Goldair GEPH213 EcoPanel Heater with Thermostat Instruction Manual |
| Make | GOLDAIR |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.19 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Klima H001 Smart Thermostat For Air Conditioner User Manual
Danfoss ECtemp 530 Electronic Thermostat Installation Guide
GENERAL LIFE MITRA 250S RF Digital Room Thermostat User Manual
sinope TH1400NP Non Programmable Low Voltage Thermostat Installation Guide
Micro-Air 359 Touchscreen Thermostat Instruction Manual
Smartica HY607B 3A Zig Bee Thermostat User Manual
Konveka MT230 Room Thermostat Instruction Manual
BEOK TDR89 Wifi Heating Thermostat Instruction Manual
resideo TH4110U2005 T4 Pro Programmable Thermostat User Manual
HYSEN HY09RF WI-FI Wireless Thermostat User Manual