Home > Dimplex > DIMPLEX ML2TA 2KW Convector Heater With Thermostat Instruction Manual

DIMPLEX ML2TA 2KW Convector Heater With Thermostat Instruction Manual

Assembly  
WARNING: DO NOT USE THE HEATER UNTIL THE FEET ARE FITTED CORRECTLY.  
WARNING: ALWAYS ENSURE THAT THE HEATER IS STOOD ON A FIRM LEVEL  
BASE NEAR TO, BUT NOT DIRECTLY UNDERNEATH A SUITABLE MAINS SUPPLY  
SOCKET.  
WARNING: ENSURE THAT CURTAINS AND FURNITURE ARE NOT POSITIONED  
CLOSE TO THE CHOSEN POSITION  
WARNING: PLEASE ENSURE THE MINIMUM CLEARANCE DIMENSIONS ARE  
MAINTAINED  
Note: These heaters are designed for operation on an AC electricity supply, and are  
suitable for use in domestic dwellings and similar indoor locations. These heaters  
are supplied with feet and handles for ease of movement. A mechanical rotary  
switch provides the ability to choose an available heat output and control the room  
temperature. These heaters are supplied with a cord and plug and are ready for use  
once the feet have been correctly fitted.  
Note: The ML Convector Series can only be used as portable heaters.  
1. To install the feet, lay the heater on its back and remove the two foot fixing screws.  
2. Assemble the feet by pressing them firmly into the convector body. The feet  
should clip into position.  
3. Secure the feet into the convector body with the two foot fixing screws. Return  
the heater upright, and the unit is now ready for use.  
6
GeneralDetails
NameDIMPLEX ML2TA 2KW Convector Heater With Thermostat Instruction Manual
MakeDimplex
LanguageEnglish
FiletypePDF (Download)
File size1.33 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Dimplex X3D Wireless Programmable Thermostat Instruction Manual
Dimplex X3D Wireless Programmable Thermostat Instruction Manual
Dimplex DWT431W Non-Programmable Thermostat 4000W Owner’s Manual
Dimplex DWT431W Non-Programmable Thermostat 4000W Owner’s Manual

DIMPLEX ML2TA 2KW Convector Heater With Thermostat Instruction Manual