Coplax PH1001T Portable Electric Space Heater with Thermostat Instruction Manual

Coplax PH1001T Portable Space Manual: Questions and Answers

What does the indicator light mean on the Coplax PH1001T Portable Space?

The indicator light turns on when the heater is working and turns off when the heater stops. Instruction Manual, p. 5

How do I set the temperature on the Coplax PH1001T?

Adjust the thermostat switch to your desired temperature setting after turning it to maximum.

1. Turn the thermostat switch to the minimum position and the heat select switch to O.
2. Plug in the appliance.
3. Turn the thermostat switch to the maximum position.
4. Turn the heat select switch to your chosen setting: blank for cool air, I for low warm air, or II for high warm air.
5. Slowly turn the thermostat switch counter-clockwise to the minimum position until the appliance stops.
6. The thermostat will maintain your desired room temperature. Instruction Manual, p. 5

What is the difference between heat settings I and II on the Coplax PH1001T Portable Space?

Setting I blows warm air at low output. Setting II blows warm air at high output. Instruction Manual, p. 5

What clearance space does the Coplax PH1001T Portable Space need around it to operate safely?

Keep at least 50 cm around the appliance. In front of the air outlet, maintain at least 120 cm clearance. Instruction Manual, p. 3

How do I clean the Coplax PH1001T Portable Space heater?

Turn off the heater, remove the plug, and wait for it to cool. Use a damp cloth on the surface only, avoiding water inside. Clean the air inlet and outlet regularly, at least twice yearly. Instruction Manual, p. 6

How can I tell if the heater is overheating?

The security system automatically switches off the appliance when heat reaches the safety limit. Instruction Manual, p. 6

How long does the Coplax PH1001T need to cool before restarting?

At least 10 minutes. Instruction Manual, p. 6