Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide

1

2

3

4

System operation settings  

1

Press the Mode button to cycle to the  

next available System mode (Ex: Heat,  

off, cool).  

MODE  

Indoor  

Heat  

FocusPRO Smart S200 Series Thermostat  

2

Cycle through the modes until the  

required System mode is displayed  

and leave it to activate.  

MENU  

Hold  

TH2320WF4011  

FAN  

Auto  

EN User Guide  

MA39511  

Fan operation settings  

1

Press/release the Fan button to cycle to  

the next available Fan mode.  

Thermostat controls  

MODE  

2

When the desired Fan mode is  

displayed, stop pressing fan button.  

Time, outdoor  

temperature, or  

indoor humidity  

(depends on  

configuration by  

installer)  

Indoor  

temperature  

setpoint  

Indoor  

Heat  

MENU  

Hold  

Fan modes:  

‒ Auto: Fan runs only when the  

FAN  

Press  

or  

to  

Auto  

change temperature  

setting  

heating or cooling system  

is on.  

‒ On: Fan is always on.  

‒ Circ: Fan runs about 33% of the  

time to circulate air.  

Set To  

MODE  

Mode  

PM  

Temperature/  

Navigation  

Increase or decrease  

temperature setpoint  

and navigate menus  

Heat/Off/Cool/  

Auto/EM Heat  

(emergency heat)  

Indoor  

Heat  

MA39512  

MENU  

Hold  

FAN  

Menu  

Auto  

Heat On  

Press to display  

options. (Schedule,  

WiFi, active alerts,  

reminders)  

Set the time and date  

Note: If time/date is set by the Internet, only the 12 or 24 hour clock option is  

available to edit.  

Smart  

System status  

Cool On/Heat  

On/Aux Heat On  

MA39553  

Time  

1

Schedule  

Fan  

Auto/On/Circulate  

Press Menu on the thermostat.  

MODE  

information  

Following time based  

schedule  

Indoor  

Heat  

2

Press  

Select.  

or  

to go to TIME. Press  

MENU  

WiFi status  

Hold  

FAN  

3

4

5

Press  

hour clock format and press Next.  

or  

to choose 12 or 24  

Actual indoor  

temperature  

Note: “Waiting for Equipment”  

shown during compressor  

protection delay  

Auto  

Press  

press Next.  

or  

to adjust the hour and  

MA39509  

Press or to adjust the minute  

and press Save & Exit.  

Compatible with 2.4 or 5 GHz WiFi network  

Date  

1

2

Press Menu on the thermostat.  

Hold  

Press or  

press Select.  

to go to DATE and  

to choose YEAR and  

to adjust the MONTH  

to choose DATE and  

Scan for the full User Manual  

3

4

5

Press or  

press Next.  

Press  

or  

M39510  

and press Next.  

Press  

or  

press SAVE & EXIT.  

You can search online for Resideo 33-00694EFS  

for the User’s Manual or scan the QR code.  

To adjust program schedules  

1

Press Menu. Then press  

SCHED is displayed. Press Select.  

or  

until  

2

A square appears around ON or OFF  

in the display. If you want to use a  

Scan to Download First Alert App  

Hold  

schedule, press  

Press NEXT to edit the schedule or  

or  

to select ON.  

press EXIT to exit the menu.  

3

4

5

If editing the schedule, press NEXT to  

edit the day or days flashing in the  

display.  

The word Wake should be flashing.  

Press NEXT. Press  

schedule period on or off. Press NEXT.  

or  

to turn this  

Hold  

If the schedule period was set to ON,  

the time will be flashing. Press  

to adjust the time for this period.  

Press NEXT.  

or  

6

The Heat setpoint will be flashing.  

Press  

setpoint for this period. Press NEXT.  

or  

to adjust the Heat  

MA39532  

7

8

9

The Cool setpoint will be flashing. Press  

or  

to adjust the Cool setpoint for this period. Press NEXT.  

The display will show the next schedule period flashing. Repeat steps 4–7  

for the other schedule periods and days.  

Press the SAVE & EXIT button at upper left.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Make	Honeywell
Language	English
Filetype	PDF (Download)
File size	0.36 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Honeywell

Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide Overview

Summary of Contents

• Page 1: System operation settings Press the Mode button to cycle to the next available System mode (Ex: Heat, off, cool). Cycle through the modes until the required System mode is displayed and leave it to activate. Fan operation settings Press/release the Fan button to cycle to the next available Fan mode. When the desired Fan mode is displayed, stop pressing the fan button. Fan modes: Auto, On, Circ. Set the time and date If time/date is set by the Internet, only the 12 or 24 hour clock option is available to edit. To adjust program schedules Press Menu. Then press Select until SCHED is displayed. A square appears around ON or OFF in the display. If editing the schedule, press NEXT to edit the day or days flashing in the display. Press SAVE & EXIT to save changes.
• Page 2: Caution regarding equipment damage hazard. Do not operate cooling system when outdoor temperature is below 50°F (10°C). Troubleshooting suggestions for thermostat difficulties. Check circuit breaker and reset if necessary. Ensure power switch at heating and cooling system is on. Verify furnace door is closed securely. Compressor protection feature may engage, requiring a 5-minute wait for safe restart. If display says “unlock”, a lockout setting may be in place. Verify correct mode settings for heating and cooling. Check with installer for range-stops that may restrict temperature settings.
• Page 3: - نظام التشغيل. - زر الانتقال إلى وضع التدفئة. - وضع التبريد. - إعدادات التحكم في المروحة. - خيارات القائمة. - ضبط درجة الحرارة. - إعدادات الوقت. - خيارات التذكير. - إعدادات الشبكة. - خيارات الحفظ والخروج.
• Page 4: - نظام التشغيل يتطلب إعدادات دقيقة. - يجب ضبط النظام لتلبية احتياجات التبريد والتدفئة. - تأكد من أن جميع المكونات تعمل بشكل صحيح. - يجب مراقبة درجات الحرارة لضمان الأداء الجيد. - يمكن أن تؤثر الإعدادات غير الصحيحة على كفاءة النظام. - يجب إجراء الصيانة الدورية للحفاظ على الأداء. - تأكد من أن النظام متوافق مع متطلبات الطاقة. - يجب اتباع التعليمات بعناية لتجنب الأعطال. - تحقق من وجود أي أضرار قبل بدء التشغيل. - يجب أن تكون جميع الاتصالات الكهربائية آمنة ومأمونة.