Home > Hotwire Heating > Hotwire Heating HWGL2 Dual Device Thermostat Instruction Manual
Hotwire Heating HWGL2 Dual Device Thermostat Instruction Manual
Programming your Thermostat.
HotwireThermostat
HotwireThermostat
This will help you programme your thermostat to come on and off automatically.
If you want to simply turn it on and off when required skip this section. When
programming Zone 2 for your Heated Towel Rail it will not be necessary to set
the temperature in the below steps. You simply set the time only and then select
“On” for options 1 and 3, and “Off” for options 2 and 4.
Instructions
Installation and Wiring
Instructions
Change between Manual and Auto Mode
The thermostat is a Dual Control model. You can
To change between Auto and Manual mode press and hold
.In manual mode,
use it to program both your Hotwire Floor Heating
and Hotwire Heated Towel Rail.
the thermostat maintains a constant set temperature manually set by the user.
Simply adjust the temperature using the arrows. In Auto mode, the thermostat
executes the preprogrammed schedules.
Carefully separate the front half of the thermostat from the back plate by
unscrewing the small screw at the bottom of the thermostat. Carefully unplug the
ribbon connector which is plugged into the front half of the thermostat. Place the
thermostat front half somewhere safe. Terminate the thermostat as shown in the
diagrams below.
This manual outlines how to program the unit. If
you have any difficulties we have a step by step
video on our website at,
(1). Press
and the day display will start flashing. Using the Increase or
Decrease button to select the day you wish to programme.(If your thermostat
is set to 5+2 day programmable mode, the programming will skip to step 3)
Lock the Keypad
To lock the keypad, press and hold the power button for 5 seconds, you will
(2). To select every day to be the same simply press and hold the Decrease button.
see a key symbol
will disappear.
. To unlock, repeat the steps above and the key symbol
(3). Press
(4). The time is now flashing. Select the time you want the heating to come on
in the morning. Then press
and Program 1 is displayed. This is the first programme function of the day.
Screw the thermostat back plate onto the flush box
LCD symbols
Icon Legend
Reset to Factory Setting
Re-connect the thermostat ribbon cable and clip the two halves together.
.
The conduct a master reset to factory settings, press the power button to turn
The buttons are locked
(5). The temperature is now flashing. Set the temperature that you want the floor
to heat to. Then press
the thermostat off. Press and hold
for 5 seconds. Move to menu 16 then
Heating is turned on
Frost protection activated
Manual mode
.
hold the Decrease button for 5 seconds.
(6). The LCD screen will show Program 2 and the time will be flashing.
This is the time that the thermostat will switch off in the morning.
(7). Use Increase and Decrease buttons to adjust the time you wish the heating
to switch off in the morning on the selected day or days.
Temporary temperature override
The floor sensor is not being read by the thermostat
Er
Day of the week
...
...
(8). Press
and the temperature will start flashing. This can be used to
Increase button (
Decrease button (
Confirmation button (
Power button
for horizontal mode)
for horizontal mode)
for horizontal mode)
maintain a minimum temperature. In most cases this is not required and the
temperature should be set to 5.
(9). Press
and the Program 3 will display. The time is also flashing. Set the
time at which you want the heating to come on in the afternoon or evening.
NOTE: If you do not wish the heating to come in the afternoon, simply
set the “off” time for only a couple of minutes after the “on” time.
Time and Day button
Programme button / Menu button (short-press)
Auto mode / Manual mode selection button (long-press)
(10). Press
(11). Press
and set the temperature required in the afternoon.
Alternating Heating Zones
60mm
and the LCD screen will show Program 4. This is the time
In order to alternate between the devices or heating zones being controlled press
45mm
that the thermostat will switch off in the afternoon / evening. Press
and set the temperature. As per above we recommend 5. Then Press
and hold “
” The LCD will display temperature (e.g. 22 °C )or ON/OFF.
Temperature will be your under floor heating. ON/OFF will be your heated towel rail.
(*). Hint: If you use the default programming of 5 week days plus 2 weekend
days you will now need to repeat the above steps for the weekend.
Setting the clock and day of the week
This thermostat is fitted with a real time clock. It is essential that the clock time
and day are set accurately if you require your programmed events to start on
time. To set follow the steps below:
You may use
to delete time periods for the weekend schedule.
Default Programming is as follows.
Rear View
(1). Touch the “ ” button and the time will start flashing. Use the increase and
decrease buttons to set the time. By holding these buttons down the time will
change faster.
Programme Start Time
Setpoint
Explanation
Connect green wire from the element to the house earth
WAKE
This is the time the heating will
come on in the morning.
01
24 °C
06:00
(2). Press
to move to the Day setting and use the increase and decrease
This is the time the heating will
switch off in the morning. It can also
be used to set a minimum
buttons to get to the correct day.
LEAVE
08:30
02
16 °C
24 °C
80mm
(3). Press
to store and exit.
temperature for the day.
Setting the Programme Schedules
RETURN
18:30
This is the time the heating will
come on in the afternoon.
03
This thermostat has the ability to programme each individual day of the week
separately, or programme 7 days of the week at once. You can also programme
weekdays (5 days) to one schedule and then weekends (2 days) to a different
schedule. See the Menu information for details on how to set this up.(refer to
Menu 9) See page 4 of this manual.
This is the time the heating will
switch off in the afternoon / evening.
If you do not require the heating in
the afternoon / evening, simply set
this time to a couple of minutes after
the “on” time.
This product should be installed by
a qualified electrician.
SLEEP
22:00
04
16 °C
| General | Details |
|---|---|
| Name | Hotwire Heating HWGL2 Dual Device Thermostat Instruction Manual |
| Make | Hotwire Heating |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.32 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell CT87A Round Thermostat Instruction Manual
MYSAir Roma Monochrome Backlit Touch Thermostat User Manual
Smart Temp SMT-450 Flexistat WiFi Thermostat Instructions
Honeywell Home TH2110U4004 Programmable Thermostat Installation Guide
Honeywell FocusPRO TH5000 Series Non-Programmable Digital Thermostat Instruction Manual
KETOTEK KTF0163 Series Smart Thermostat Instruction Manual
network thermostat X X7-WIFI Smart Touchscreen Thermostat Instructions
Meross MTS960 Smart Wi-Fi Socket Thermostat Instruction Manual
GENERAL LIFE ARUNA 302S RF Digital Room Thermostat User Manual
Schneider Electric 2290B Programmable Room Thermostat Instruction Manual