GENERAL LIFE 270 Wireless Room Thermostat User Manual

1

2

ScreenIndicators  

As shown in the picture above, press the screwdriver forward from the  

space shown, bend the tabs and separate the front cover. Insert 2 new  

AAA alkaline batteries in the battery housing with the correct battery  

direction. Replace both batteries at the same time. Then align the  

front part of your Room Thermostat to the back and squeeze it  

towards theback.  

ENGLISH  

5

DIGITAL ROOM THERMOSTAT  

6

7

1

2

generallife.com.tr  

Low Battery Warning: When the “  

” icon appears on the screen, it  

means “low battery warning”. It is recommended to replace the  

batterieswhen thiswarning appears.  

Warning: When the product is not used for a long period (more than 15  

days), remove the batteries. Otherwise, malfunctions that may occur  

would beout of warranty.  

3

4

SENNA 270 USER MANUAL  

GENERALSPECIFICATIONS  

DIGITAL ROOM THERMOSTAT  

1

2

3

4

5

Room Temperature  

SENNA 270 is a wired room thermostat. The user can adjust the room  

temperature with the required temperature and get more comfortable  

and economic heating/cooling.  

 DifferentModeOptions(Comfort Modeand Economy Mode)  

 PreciseTemperatureMeasurement  

 HeatingCalibration  

Pleasethrowyourdead batteriesinto thewastebin for batteries.  

Set Temperature  

Economy Mode  

ROOMTHERMOSTATWIRINGDIAGRAM  

Comfort Mode  

Battery Indicator  

HEATING/COOLING UNIT  

ON/OFFControl  

WiredConnection  

TPIAlgorithm  

Heating Indicator  

- If the Heating Indicator is blinking, the heating unit is  

SENNA 270  

USER MANUAL  

6

working.  

 Heating/Cooling Modes  

- If the Heating Indicator is steady, the heating unit is not  

working.  

Cooling Indicator  

SENNA270ANDEQUIPMENTS  

SENNA 270  

Alkaline  

Battery  

Dowels and  

Screws  

- If the Cooling Indicator is blinking, the cooling unit is  

Room Thermostat  

7

working.  

NO COM  

- If the Cooling Indicator is steady, the cooling unit is not  

working.  

ROOMTHERMOSTATPLACEMENT  

Warning!  

Room Thermostat needs to be placed in the room which is used most  

frequently. For instance; living room or lounge. Placing the Room  

Thermostat in a spot that have air circulation like entrance of a room  

or side of window should be avoided. Also anywhere close to  

heating/cooling units such as radiator, stove and spots which get  

direct sun lights would not be suitable. Room Thermostat needs to be  

located above the floor 150 cm height. Few trials may be made to find  

themostconvenientspot.  

Operations within the heating  

installationmustbecarriedout byprofessionally qualified persons.  

/

cooling unit or the electrical  

TECHNICALDATA  

Dimensions  

Operating Current  

Relay NO Switching Current  

ROOMTHERMOSTATTEMPERATURECALIBRATION  

Temperature sensors which are used in Room Thermostats are highly  

sensitive. You may need to calibrate your Room Thermostat if you  

would like to get the same temperature values with other  

thermometersin yourliving space.  

 While your device is turned off, press and hold the "On/Off"button  

for 3seconds.  

85mm / 125mm / 19mm  

3V DC (2 x AAA alkaline battery)  

2A/30VDC (Resistive load)  

0.5A/125VAC (Resistive load)  

0.1^oC  

Temperature Measurement  

Accuracy  

Operating Temperature Range  

Battery Life  

(5^oC) – (30^oC)  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

 Press the "On/Off" button until the “  

” menu appers. In order to  

Operating Temperature  

Storage Temperature  

see the desired temperature, set the temperature difference by  

press the “Temperature Adjustment Buttons”. This value can be  

arrangedbetween“-8^oC" and “+8^oC".  

ROOMTHERMOSTAT  

ButtonsFunctions  

 To save the settings and exit, press the "On/Off" button until the  

deviceturnsoff.  

Note:Recommended tempreturecalibrationis“0.0^oC”.  

1

FACTORY SETTINGS RESET  

2

3

You can reset your Room Thermostat to its default factory settings.  

This operation resets the mode temperature values, calibration  

setting and heating/coling modes to factory setting. To reset your  

Room Thermostattofactorysetting:  

4

5

6

 While your device is turned off, press and hold the "On/Off"button  

for 3seconds.  

BATTERY PLACEMENT  

Before starting, power off the device connected to the Room  

Thermostatand makesurethattheenergy iscutoff.  

 Pressthe“On/Off” button until “  

”menu appears.  

” option by using “+” or “-”  

1

2

3

4

5

6

ON/OFF and Setting Button  

 While in the “  

” menu, select the “  

Economy Mode  

buttons and pressthe“On/Off” button.  

Comfort Mode  

 Your devicewillbeturned off and resettofactorysettings.  

Heating/Cooling Modes (Press and hold for 5 seconds.)  

Temperature Adjustment (Increasing)  

Temperature Adjustment (Decreasing)  

MODESETTINGS  

There are 2 modes in the Room Thermostat. These are Comfort Mode  

“

” and Economy Mode “ ”. Modes work according to the pre-set  

temperaturevaluesadjustedbyuser.  

Inordertochange thecomfort mode temperaturevalue;  

 Pressand hold thecomfort mode button for 3seconds.  

 Change thetemperaturevaluebypressing “+” or“-“ buttons.  

 Press the comfort mode button once to save the changes you have  

madeorwait10seconds.  

generallife.com.tr  

1

2

3

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE 270 Wireless Room Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	1.88 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE 270 Wireless Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Low battery warning: When the icon appears on the screen, it means low battery warning. It is recommended to replace the batteries when this warning appears. Warning: When the product is not used for a long period (more than 15 days), remove the batteries. SENNA 270 is a wired room thermostat. The user can adjust the room temperature for more comfortable and economic heating/cooling. Room thermostat needs to be placed in the room which is used most frequently, avoiding areas with direct sunlight or near heating/cooling units. Temperature sensors in room thermostats are highly sensitive and may require calibration to match other thermometers in the living space. You can reset your room thermostat to its default factory settings, which resets mode temperature values and calibration settings. There are 2 modes in the room thermostat: Comfort Mode and Economy Mode, which work according to pre-set temperature values adjusted by the user. To change the comfort mode temperature value, press and hold the comfort mode button for 3 seconds. Press the On/Off button until the menu appears to access various settings. Recommended temperature calibration is 0.0°C.
• Page 2: Warranty conditions state that the warranty period starts from the invoice date and covers manufacturing defects for 5 years. Devices are delivered in working condition, and on-site commissioning incurs a service fee. Repairs under warranty must be conducted at the company's factory, and transportation costs for on-site services are the customer's responsibility. Maintenance is also handled by the company, with travel expenses borne by the customer. Malfunctions during the warranty period are assessed to determine if they are due to customer or manufacturer faults. Manufacturer-induced errors allow for repair or replacement at no cost, while customer-caused faults incur all expenses. Customers must report any product damages to maintain warranty rights. Malfunctions from improper use are not covered by the warranty. Devices are out of warranty if damaged by the customer or if used with unauthorized brands. Battery leakage and damages from environmental factors are also excluded from warranty coverage.